First you have to consider one thing, and that the most common tools such as screwdriver, square, brush, basement, piles, etc., we will not include them here, since we consider them so basic that almost everyone has them in their house to make home arrangements. As we mentioned earlier, we will list specific tools to do modding.
Glue and tools for cutting acrylics
One of the most commonly used features of PC modeling acrylic plastic, both for its low price and ease of use. So, to make any kind of panel, for example, a PC case, it is normal to use this kind of thing and you will need some glue and a special cutting tool.
Be careful with glue, because it should be specified for acrylic plastic, as it is the only one that guarantees permanent adhesion to this material and, in addition, does not leave marks (this is useful when using transparent acrylic plastic).
Hair dryer
Although it may seem false, a dryer is a widely used tool in PC modeling. And not because it can work to speed up the drying
Measurement knife / scarf
When doing moderation work on a PC, we will often want to place customized and even hand-made stickers. Therefore, it is highly recommended to have a scalpel or artisan scale as they will give us excellent accuracy for the work to be complete. They are also very useful, even if it's a state (removing burrs) as long as the piece doesn't go through the metal.
This measuring tool is also quite cheap (costs about 6 euros for most blades left), so it's worth having in the toolbox.
Crystal primer cream
When we want to make a glass primer, the best way to make it look good is to do it with something of its own, such as the original "Armor Etch" cream (it's a commercially available product, but it's one that you can easily find, even on Amazon).
The residual effect with this type of product is unavoidable.
Spray / paint the airbrush
Many basic PC replacement items. Normally, if we make a change to a machine because we don't like how it is in its original form, that's why we will fix it. And the first thing we usually change is, logically, color (designed to "taste colors"). It is important that the paint is sprinkled
However, spray paint also works perfectly, although we will be forced to use molds or sterile ones, and it is also "dirty" in the sense that we will need an area – if possible outdoors – for spraying.
Dremel, an important measurement tool
Of course, one of the basic tools for PC replacement is Dremel, and the other is a better finish. A variety of tool that will help us both make the drive and cut any type of material (including metal boxing), sanding, and so on.
Hot kit
Another tool that you probably use most when modding on a PC is aneringering iron (it has its own support kit, tin, etc.). Whether you need to shorten / stretch the wires, put the LED straps in one or more other jobs, the welding kit is another basic measuring tool.
Hot melted glue / epoxy silicone
Modding is, after all, creative and this is one of the basic tools. In the case of PC repair, it can be used without further adhering the LED strips where there are no hooks, or gluing the acrylic plastic plate where there are no supports or grinding. Epoxy silicone can produce the same effect.
As an additional note, you can often work with us double tape face these same requirements.
Riveter
There are times when we should & # 39; t demolish & # 39; box so we can remove some parts and turn them on, but then if we put them back we can't do it without a riveter. Another very basic and cheap tool.
These are all the tools you will need to get started on PC replacement, although of course, as we show at the beginning, it will depend on the tasks you want to perform, you may need a few tools, or some other specific features not included here.
Table of Contents
