Thus, BIOS is an essential configuration tool for users with advanced knowledge and is far enough away from others that they end up performing a misconfiguration of the system. So it is more than possible that your PC is not operating at one hundred percent of its capacity due to some inactive functions in the BIOS. So if you have a high-end Gaming PC, you will always do well to get the most out of it.
Now there are many different ways to enter BIOS from our system, below we are going to tell you about the most common of all.
Enter BIOS during boot
| Brand | Key |
|---|---|
| ACER | SUPR or F2 |
| ASUS | LED for the -A series, F2 or ESC for the rest. |
| COMPAQ | F10 |
| DELL | F2 |
| Hewlett packard | ESC, F1 F10 or F11 depending on model |
| SAMSUNG | F2 for your PCs and F10 for your ultrabooks |
| SONY | It can be F1, F2 or F3. If you have a VAIO, this will be the assistance key |
| TOSHIBA | F1, F12 or the ESC key. |
The various brands of prefabricated computers, as well as the motherboards sold so that we can assemble our own PC are assigned a key which, when pressed on our keyboard during system startup, allows us to enter the BIOS. So if you do not know the key to press, you just have to look at our table and press the key that we mark there to have direct access. By the way, if your computer model is not in the list or you do not know the brand of your motherboard, you should keep in mind that the most general key for this procedure is usually the key. SUPR.
This is the most common way to access it, unfortunately the computer boot process cannot be stopped and we often do not have time to enter BIOS quickly enough because if your computer has quick start enabled, you will not have time to press any of the specified keys. In that case, don’t worry, there are other ways to do it, which we will tell you about below.
How to enter BIOS from Windows
The first way to access BIOS from Windows is to do so from System Settings. It’s in the menu started with a cogwheel icon, so you just have to click on it to enter setup. As always, the started menu can be accessed by pressing the key with the Windows icon on the keyboard or by clicking the same icon on the taskbar, usually located at the bottom.
- Once inside, go to the section Updates and Security.
- Once inside we will go to the tab Recovery.
- In this tab we will press the option of advanced start.
After that the PC will restart, but it will not do it in the normal way but with software before starting. Inside we have to select the option Problem solving, Then in Advanced options and, finally, we will continue UEFI Firmware Settings.
Access from the start menu
The process we described in the previous section may be too complicated and slow for most users. However, don’t worry, because there is a much simpler method to enter the BIOS than the one we just saw. The operation is as easy as going power options. Once there, all you have to do is press at the same time the Tecla Shift, up arrow just above the CTRL key on the keyboard, while doing Click on with the mouse on the restart option.
This will bring you to menu from Advanced startup settings that we have already seen in the previous section, As long as from the not to follow are exactly equal which we already described a moment ago.
Using a startup disk
There is an alternate option which is none other than using a Windows Emergency Boot disk to enter BIOS, which is ideal if the operating system is not loading you and is independent of the one you are using. you are using, so you can use this method if you are a linux user. Of course, it is not valid for Apple Macintosh since its boot sector is different from that of a classic PC.
The only trade-off for this method is that you will have to configure the BIOS to access from USB as the first boot device, so in this case, it’s the fish biting its tail. Something that we recommend that you have, as it may be good for you to diagnose from a Linux distribution, verify that the storage units are working fine, or that when they start up they show the blue screen of death or BSOD.
Once inside the startup disk, just click on repair your computer, select repair the problem, configure the UEFI firmware and after that restart it. This will cause the computer to boot from the BIOS.
Table of Contents
