When I started having problems with the WiFi signal in my house, I tried several methods with success, such as using an old cell phone as a repeater, I even used a CPL for a few months. Each with its strengths and weaknesses, I decided to take a considerable leap, which also involved a certain financial investment: opting for a WiFi Mesh device.
These devices (in my case I have two “satellites” and a standard) instantly solved the streaming outages, slow downloads and constant “not connected” notifications that appeared on my computers. However, over time, my worst fears returned, starting at a frightening speed. And the solution was the most unexpected: change a cable.
When a cable affects a wireless connection
This sounds like a joke, but it’s not. A cable is the cause of my latest issues with this damn WiFi, and they don’t seem to have anything to do with each other. After thinking that the errors connecting my devices to the router had gone away, they came back in a somewhat strange way: the speed began to decrease noticeably.
After a few days of not paying much attention to it, it got worse to the point where I was seeing endless loading screens when playing a video on YouTube. I contacted my carrier and after a few reboots it was working fine again.
They were more like mirages.because once again I suffered from such low speed that even Google took a while to show me its search engine. I investigated again from my cell phone until, after another call to the technical service, they offered me a different answer: try a change. Replace the Ethernet cable that connects my operator’s router to the WiFi Mesh standard.

Now the problems are over. And the reason was a cable that surely had to go. However, the best thing about the change was not restoring a stable and fast WiFi connection, but rather having realized a mistake I had when purchasing this system.
The Importance of Using the Right Ethernet
Which one was it? Use an Ethernet cable you had lying around in a forgotten drawer, and not just because it was worn out. Besides the obvious problems, that wasn’t the only failure: I had heard about the categories of an Ethernet cable, and now I know that I was using an old cable, specifically Cat5e, from a few years ago. While it supports the speed of my connection, it’s not optimal.
So I went to buy a network cable, and I didn’t hesitate: I chose one of the category 6 and I would even recommend buying a higher one. Especially when it connects two critically important devices, as happened to me. The operator’s router receives the fiber optic connection directly, and a complementary system such as a WiFi Mesh can have a significant “bottleneck” if the least suitable cable is used.
That is why I will now advise to look at this aspect when installing routers as an alternative to the one provided by the technician. Also, when I notice that something is not working as it should, I will try this Ethernet change. Now, if you are wondering what type you need, below you will find a table with the supported speeds for each category:
|
Speed (Mbps) |
download speed (MB/s) |
|
|---|---|---|
|
Cat 5 Ethernet |
100 Mbps |
15.5 MB/s |
|
Ethernet Cat 5e |
1000 Mbps |
150.5 MB/s |
|
Ethernet Cat 6 |
1000 Mbps |
150.5 MB/s |
|
Ethernet Cat 6a |
10,000 Mbps |
1250 MB/s |
|
Ethernet Cat 7 |
10,000 Mbps |
1250 MB/s |
|
Ethernet Cat 7a |
10,000 Mbps |
1250 MB/s |
|
Cat 8 Ethernet |
40,000 Mbps |
5000 MB/s |
This way, it will be easier to determine which one is best for you. Do you have a 1 Gbps connection? A Category 5e or 6 Ethernet will be sufficient. Do you want to make sure that it will remain useful in the future? You can opt for more modern solutions like Cat 6A or 7, which will be enough to deal with dizziness speeds of up to 10 “gigs” that some operators like DIGI and Yoigo offer. Telefónica has proven that it goes even further, although it is not yet available to customers.
In short: I learned a lot from WiFi issues, and even though I solved them with a simple change, I also gained other knowledge that I will never forget. The tricky part is thinking that a simple Ethernet cable would cause these issues… and I will never know how it happened, I only touched it a few times.
Cover image | Amparo Babiloni for Xataka Android
In Xataka Android | We don’t use WiFi well at home. This is how I configured my Android to leave a stable connection with the rest of the devices



