Melting cable at RTX 5090? The first user drama is quickly exposed

Geralt of Sanctuary

Melting cable at RTX 5090? The first user drama is quickly exposed

cable, drama, Exposed, melting, quickly, RTX, user

Is there a new plug drama with the RTX 5090?
Is there a new plug drama with the RTX 5090?

Is there a new plug drama with the RTX 5090?

In October 2022, the RTX 4090 and a new 12VHPWR connection appeared, which was needed to satisfy the GPU electricity hunger. Only a few days later reports followed that the connection or the plug could melt.

Already at the RTX 4080 Super there was the Nvidia mandate, which should rely on the upcoming graphics cards on the revised version in the form of the 12V-2×6 plug, which is also used for the RTX 5090 and the other Blackwell GPUS.

As a result, Nvidia was sure enough to publicly explain that the problem of the melting plugs, despite increased power consumption, had ended.

The first case appeared just a few days after the release, in which a reviewer of the China-exclusive RTX 5090D complained. Only shortly later it turns out that responsibility for the mishap is more likely to be found with the user than the GPU manufacturer.

RTX 5090 unboxing - first impression of Nvidia's new flagship graphics card
RTX 5090 unboxing - first impression of Nvidia's new flagship graphics card


Start video


4:52


RTX 5090 unboxing – first impression of Nvidia's new flagship graphics card

What happened? The channel of the Chinese portal Unika's Hardware shared a report by the “PCM” tech website from Hong Kong, which pointed out a test of the RTX 5090D on X (formerly Twitter).

The GPU, which was designed exclusively for the Chinese market, had affected both ends of the cable under a permanent burden, which can also be clearly seen in the picture:

Recommended editorial content

At this point you will find an external content of Twitter, which complements the article.
You can have it displayed with one click and hide it again.

I agree that the content of Twitter is displayed.

Personal data can be transmitted to third -party platforms. More on this in our data protection declaration.

Link to Twitter content

The drama that was an initial drama was stopped just a few hours later: After extensive tests of the RTX 5090D, RTX 5080 and RTX 4080, the system of PCM showed instabilities such as Uniko's hardware in another tweet.

The sticking point turned out to check the pins on the three different graphics cards:

  • The tested RTX 4090 Founder's Edition, which still relies on the old 12VHPWR connection, showed “clear fire markings” here.
  • However, there were no damage to both the RTX 5090D and the RTX 5080.

Contrary to the original fear, the RTX 4090 FE is available as a culprit that made the cable melt. At least up to this point, Nvidia's at the beginning is appropriate in the context of the plug problem.

Leave a Comment