Have you ever wanted to share your iPhone's cellular communications with other users or devices like laptops or iPads and don't know how to do it? It's very easy to set up an iPhone as a wifi access point either hotspot and here we will show you how to do it.
In addition, we will make sure to show you how to use adequate security measures, to set up a secure Wi-Fi network password created by your iPhone as an access point.
It's easy to turn your iPhone into an access point, because it's common among users and Apple has been preparing for this task with the arrival of new versions of iOS. It is best to consider the terms of your contractor's contract to avoid receiving additional costs.
Pay special attention when traveling outside your country. Or today, the majority of workers within the European Union offer roaming For calls and data, in some cases you may incur excessive costs that affect your bill.
Keep in mind that your Mac or PC laptop can significantly increase data usage by identifying it as connected to a Wi-Fi network and not setting up a connection enabled by your mobile phone, based on 3G or 4G connectivity.
How to make the point of accessing the iPhone
Creating an access point converts your iPhone into a Wi-Fi router, similar to your home router. The iPhone connects to the Internet using your 3G / 4G connection to your mobile data, and then transfers it over a Wi-Fi wireless connection to which a Mac, iPad, PC or other phone can connect. You can also connect it to the USB port of your computer.
In fact, there are two ways to make a point of entry with your iPhone.
Set up an iPhone access point immediately
If you have iOS 13 installed on your iPhone, the fastest way to open a Hotspot or access point is to:
- On the iPhone X, XS, XR, or iPhone 11, drag down from the top corner to open Control Center. On the old iPhone, swipe down to open Control Center.
- Press hard inside the block for four icons representing flight, wifi and Bluetooth mode.
- This will open up a larger block of icons, including AirDrop and Personal Access Point or Hotspot. Just tap on the personal access point and you'll & # 39; Apply & # 39 ;.
Set up an iPhone portal using & # 39; Settings & # 39;
In previous versions of iOS it was not possible to run Hotspot from the Control Center. In fact, the entry point can only be configured within the & # 39; Settings & # 39; section. Access points can be power-efficient with respect to the settings in iOS 13, but they work in a very different way.
On iOS 13
- Turn on setup
- Click & # 39; Personal Access & # 39; (under mobile data). This will automatically activate your Hotspot on iOS 13.
- New options on iOS 13 include the new option & # 39; Share personal access points with Family Sharing Members & # 39; and & # 39; Let others join & # 39 ;. If you want to create an entry point, you must allow others to join. Your Hotspot will be automatically visible, but some will need to enter a password to join.
- You and anyone you share with Family on iOS 13 can automatically log into your Hotspot without using a password – which is why the new Family Sharing tab.
- Tap this and you'll see an option to allow other family members to join your Hotspot. You can choose between & # 39; application approval or default & # 39; to find out how they will join your entry.
In versions prior to iOS 13
- Open the & # 39; Settings & # 39; App, then tap Móviles Mobile Data & # 39; (on iOS 10 or later). For some previous versions of iOS, you should only select Mobile / cell phones).
- Now press the personal access point & # 39; t leave it marked. (Touch the slide to turn it green.)
- If wifi and / or Blux is off, iOS will ask you if you want to turn it on again. We recommend doing so, without them the access point will be limited to the USB cable connection. (Safe).
- Click & # 39; Wifi Password & # 39; and enter a secure password. (This has nothing to do with your Apple ID or standard wifi connection.)
- Now check the name of the access point shown to look for it on other devices and find it over Wi-Fi.
If you are connected to a Hotspot or an access point transmitted by your device, any other device you have can connect without the need to enter a password, as long as you are in iCloud.
If you are using iOS 13 and using Family Sharing, any device for your family member will automatically connect to the access point without needing a password set.
How to connect to iPhone access point from Mac
Now that you're able to set up your iPhone as an access point for other devices, we'll show you how to connect your MacBook or Mac.
- Click the wifi icon found in the menu bar of your Mac. You will see many wireless networks that you can view in your area. Turn on wifi if necessary.
- In the Personal Hotspots section, you should see the Hotspot on your iPhone (if you don't have a Personal Hotspot section, you should find it below).
- If you use iOS 13, your Mac should be automatically connected, whenever you sign in to iCloud; otherwise, enter the password.
- If you do not have a wifi icon in your Mac menu bar, open & # 39; System Preferences & # 39; then click & # 39; Network & # 39; Select wifi from the list on the left. Select the entry point for your iPhone from the dropdown menu by network name.
You can now access the Internet from your Mac or iPad using your iPhone connection. The browsing experience may vary depending on the quality of the network connection provided by your storage location and availability.
When you're done, don't forget to drag & # 39; Settings> Mobile> Personal & # 39; access point on your iPhone and mark it as & # 39; Disabled & # 39;
What if the Mac doesn't connect to your Wi-Fi hotspot?
We have options to diagnose the disease. The wizard allows you to display various tests on our Mac before creating a diagnostic report. This problem may have been caused by an issue with iOS 13 that prevents Hotspot sharing from working.
How to connect to iPhone access point from Windows PC
Once you've approved your access point from the iPhone, you should be able to see the network from any computer, and also from your Windows PC.
- Start by activating wifi on your PC
- Then click on the wifi icon in the taskbar and search for a new network.
- Select the one you have associated with your iPhone.
- Click the link and enter the password.
How to connect to iPhone access point via Bluetooth
You can connect using Bluetooth. You should pair your iPhone with your computer using a simple code.
- On a Mac, you'll need to turn on the likes of & # 39; Sistence> Bluetooth> Turn on Bluetooth & # 39 ;, and search for your iPhone network to connect.
- On a PC, you should click on & # 39; Join a personal network network> Install device & # 39; and select the name of your iPhone from the ones shown.
How to connect to an iPhone port with USB
As you know, you can also communicate with your iPhone from your Mac using a USB cable, which would be a great option if you're in a place where there are multiple Wi-Fi networks. You may also be interested in security reasons.
You will need that if you have the latest version of iTunes on your Mac. If you have already upgraded your device to the latest version of macOS Catalina, this will no longer be necessary, since your iPhone will be managed by Finder.
You can find all these stories in the article first impression of macOS Catalina.
Connect the iPhone to your Mac with a USB cable with Lightning connector on one side and USB-C on the other. You may need an adapter, unless you own an iPhone 11 or iPhone 11 Pro, because these models already install it.
You should now see a warning that asks if you trust this computer. Click & # 39; Trust & # 39 ;. Next, select your iPhone from the dropdown list of networks with the wifi logo, located in the menu bar.
Risks and warnings
What happens if someone tries to hack your connection or impersonates you using a hotspot taken by your iPhone?
Ideally, you should feel safe as your iPhone entry point is password protected. (All the more reasons to unselect the "123456" keys or another one that can be easily identified).
In addition, you will see a small notification at the top of your iPhone screen when the device reaches your access point either hotspot, for details
Another important caution is related to the data restrictions used for navigation, which you must protect from downloading heavy programs or files, or performing system updates.
It's easy to forget, when accessing the web using a device that is usually limited to a Wi-Fi connection, that is connected to a 3G or 4G data network. You will find it near the clock.
Table of Contents
