THE Jiukoum Sanctuary in Zelda: Tears of the Kingdom will test your ingenuity by giving you a few slabs and some fans to cross several rails connecting areas of the shrine.
As with many other shrines in Zelda: Tears of the Kingdom, there are probably multiple ways to build the items and devices you need to solve this shrine, but this is how we solved it. With Jiukoum Shrine, the most important thing to know is that you will be building a few contraptions using Ultrahand.
Without further ado, we’ll show you how to complete Jiukoum Shrine in Zelda: Tears of the Kingdom.
On this page:
If you want to know more about Link’s adventure, go to our Zelda: Tears of the Kingdom walkthrough.
Location of Jiukoum Shrine in Zelda Tears of the Kingdom
The Jiukoum Shrine in Zelda: Tears of the Kingdom is located in Meadows of Faron, south of the Popla foothills And southeast of Popla Hills Skyview Tower in Faron. We have marked its exact location on the map below and the coordinates of Jiukoum Shrine are (0867, -2279, 0141).
Jiukoum Shrine puzzle solution in Zelda Tears of the Kingdom
To solve the Jiukoum shrine in Zelda: Tears of the Kingdom, you must build several platforms with slabs to navigate the rails to the end of the shrine.
When you first enter the shrine, you’ll see a large set of rails in the middle of the room and some loose slabs next to it.
Use Ultrahand to connect two tiles together to form a long rectangle. Next, balance the rectangle so that it rests on the two rails in the middle of the room.
Once you put the slab on the tracks, it will start to move. Jump on the slab and go up the rails on the other side. However, be careful, if the slab is not properly balanced on the rails, it will fall once it starts moving and can knock you into the abyss below.
When you are in the next area, look to your right. You will see more rails and loose slabs here. You should also see that there is already a large rectangular slab on the rails. Before doing anything else, quickly run to the rails and remove the rectangular slab with Ultrahand. Then lay the slab along with the rest of the loose slabs in that area.
Once you’ve done that, head to the pile of loose slabs and you should see an opening in the wall nearby. In this opening there will be a small set of rails and a slightly raised area with a chest on it.
There are probably multiple ways to get this chest, but this is how we did it. Use Ultrahand to balance the long rectangular slab on the rails so that it is parallel to the rails themselves. Next, grab one of the loose slabs and attach it to the end of the rectangular slab on the rails to create a ramp that leads to the chest.
Climb the ramp to access the chest. This chest contains a double Sticky Elixir. Once you’ve collected the chest, return to the pile of loose slabs.
Dismantle your ramp and lay the long rectangular slab flat on the ground. Then place two square slabs on it to look like the image below:
Then take your creation and place it on the rails in the middle of the room so that the square slabs hug each side of the rails here.
Once you’ve done that, quickly jump on your creation to run it down the rails to the next area. Don’t be discouraged if it doesn’t work the first time you do it, it may take a few tries to get the square platform spacing correct.
When you’re in the next area, you should see some rails above you and a set of steps leading up to an elevated part of this area. Go up here and you should then see some looser slabs and some Zonai fans. Here you’ll need to build a contraption that you can traverse to the end of the shrine – but the rail formation halfway through becomes a set of rails in the middle, while the start of the rails is a set of double rails . tracks.
Again, there are probably multiple ways to fix this problem, but here’s how we did it.
Grab the long rectangular slab on the floor and make sure it’s somewhere you can easily add things. Then attach a stone slab to each end of the short sides of the long platform so that they sit upright. You will also want to add one directly in the middle of the long slab.
Then flip the craft over so that it is standing upright with the top of the long slab on top and the square slabs acting as legs. Once it’s like that, attach three Zonai fans along the long edge of the top of the long slab so they can propel it forward.
Now, once you are ready, carry your contraption to the set of dual rails in the middle of the room and place the contraption down so that two of the “legs” of the square slab are slotted between the rails them themselves.
When you’re happy with it, hop on your craft, activate the fans, and ride it along the rails to the end of the shrine to collect your Blessing Light.
Congratulations on completing Jiukoum Shrine! If you need more help on your adventure through Hyrule, check out our Shrine Locations Guide or our Skyview Towers Locations Guide to find your way. You can also find out how to get the Giant White Stallion if you want a new horse.
Manage cookie settings
