problems and possible solutions to better use it during the summer

Summer can be a hostile season for our mobile phones and electronic devices, so it is advisable to be very careful during this season. In Europe, the sun can be a determining factor, not only because of the heat, which can damage electronic devices, but also because of the viewing difficulties it can cause.

And the fact is, when we try to use a screen illuminated under sunlight, it is possible that it will not be seen correctly, or at least not as good as when it is turned on under normal circumstances. This can be due to several factors and, depending on each mobile phone, it may be possible to improve the experience it offers.

The maximum brightness that each display can achieve is determined by the model. This brightness level It’s measured in nits, and the more nits a display has, the better it will look when we’re away from home.since the brighter it will be. These maximum nits for each screen cannot be increased.

When we talk about screen technology. Generally, it is better to have an OLED or AMOLED screen. instead of an LCD screen. This is because the former have a higher brightness level and the fact that their black colors are displayed by turning off the pixels makes it purer and has a greater contrast with light colors.

However, it should be taken into account that not all OLED or IPS screens are the same. As with everything, there are high-end models and low-end models, so The best we can do is take care of your specific benefits and at its maximum brightness level and its average brightness level.

Basic: Cleaning the screen

There are many tricks that, while not significantly improving the experience, can prevent it from getting worse. The first and most important thing is to clean the screenbecause dirt can produce reflections that make it difficult to see certain areas depending on the impact of light.

Another thing to keep in mind is that polarized sunglasses can affect the viewing of the mobile screen, causing an effect that darkens the screen and prevents us from seeing the mobile well if we don’t have it in front of our eyes. As long as you wear glasses and you can’t see your phone well, try taking them off or focusing the device more.

Similarly, poor quality screen protectors can also cause glare that makes it difficult to see the screen in these situations, so it may be a good option to remove it or opt for a better quality one.

The problem of brightness

As we said, it will not be possible in any case to exceed the maximum brightness level offered by the screen, and this This will only be done in situations where the mobile detects that a light is shining on it. completely and it can be difficult to see its contents. Auto-brightness can be a nice option if you are constantly going in and out of indoor spaces.

Basically, this option is responsible for regulating the brightness without the user having to do anything. This regulation will be carried out based on the brightness detected in the environment thanks to a sensor that is usually located at the top of the screen. In this way, it will adapt to each place where we are to offer us the most recommended level of brightness.

Even though it’s set to automatic, you can still change its intensity from the notification bar, and it’s handy to always have it on maximum when you’re outside. When the sun shines full on them, Cell phones of some brands even increase saturation by one more level. color for easy viewing.

Some customization layers have options dedicated to improving certain sections of the screen that will make it look better when we take the phone out on a sunny day. OneUI, Samsung’s customization layer, is one of those that has these options.

If we access the settings and inside we go to the Screen section, it will be possible enable an option called Extra Brightness. This will increase the maximum limit to which the device allows you to adjust the brightness so that it offers additional performance in this regard. In exchange, yes, it will consume a greater amount of battery, so it will be necessary to evaluate at all times if the greater expense is worth it.

Say no to the dark path

Dark mode was implemented on Android several generations ago, and the truth is that it has been a resounding success, ever since Many applications have been adapted offer an alternative in terms of design with a darker interface that can be modified at any time.

This can be very useful to save battery if we have an AMOLED screen, because thanks to the way it represents black, it gets a better autonomy. But it is also very useful to use your mobile phone at night, when The light emitted by the screen can be annoying.

However, this is not It is not recommended to use this interface mode on the street and in the sun.because the interface can be much more difficult to navigate. The contrast can even make it difficult to read, so the best option is to turn off dark mode if it is not dark. It is also possible to schedule it to turn on and off automatically.

saturated colors

Regardless of the screen technology, Android manufacturers usually provide an option in the settings to change color rendering mode that the panel offers. Basically, users can choose whether they are looking for a natural or slightly saturated color experience.

In the latter case, the colors will be a little more attractive. For situations in which we cannot see well because of the sun, it is advisable to choose this option for make everything on the screen stand out more. And a higher contrast level can help us better distinguish certain elements on the screen.

In fact, some manufacturers integrate into their devices the action of automatically increasing the saturation and contrast of the screen elements when it detects a large source of light pointed at it. This can also make what is on the panel more visible.