so you can have a faster internet connection than ever before

At the beginning of this century, in Spanish homes, the Internet connection was beginning to become common. To do this, modems were used (very different from today’s FTTR, which is the most advanced technology for homes) that were connected to the telephone network and made phone calls impossible as long as you wanted to be connected. Normally, the connection point was only one computer in the whole house, so it was totally useless to have a network in the house.

A quarter of a century later, things have changed a lot, and it is normal to have not only several computers connected, but also many other devices, such as televisions and mobile phones, not to mention the dozens of home automation devices that we have at home. That’s the speed of the network is much greater than before, but also its stability.

There is no point in having 600 Mbps access at home if you only have this speed in the living room. The vast majority, if not all, of our devices are connected wirelessly to our router., making it difficult to achieve maximum connection speed. Additionally, the router is usually located in the living room, which is not where the computer is usually kept, nor computers if there are several.

One solution to extend the connection speed is to use a Mesh of amplifiers, the Mesh routers As they have been fashionable in recent years. Amazon and Google offer some devices, as well as other well-known brands in the connectivity industry. The problem is that it always depends on the structure of the house whether or not you get a good wireless connection.

Programmable controllers have been one of the options to transmit the network from one room to another without using Wi-Fi, although their power supply or possible interference with certain devices can cause problems. But these are not the only devices capable convert an existing home installation into a communications network.

From coaxial cable to Ethernet

Most of the housing built in recent decades in Europe has, in addition to an electricity network, a coaxial cable network that allows a television to be connected and the signal to be received. In many homes this antenna input is only available in one room, but in other homes There are entrances to several rooms, such as bedrooms or the kitchen.

Whether or not there are televisions in these rooms, it is possible use the coaxial cable network to route the fiber optic signal from the point where the fiber rosette is located to the rest of the locations. To do this, you need devices that connect to the antenna socket of the two rooms you want to connect.

What these devices do is plug into the antenna socket and allow an Ethernet cable to be connected to itwhich will then connect to a TV, computer or any other device with a compatible port. There are even accessories to provide this connection to mobile phones.

It is very important to know that you must have direct coaxial cabling and it is not possible to create a network of this type in installations that already have signal amplifiers, repeaters and other devices . Yes, it can be used in rooms where there is just a TV connected to the antenna socket.

Types of adapters

When purchasing one of these connectors, you need to know what you need. To start, you have to put one in each coaxial cable socket where you want to connect a device via the Ethernet network. This implies that at least two devices will be required. And no, they’re not particularly cheap, especially if you’re looking for those that offer more speed.

Furthermore, It is important to know if you will also be watching television in these rooms.because if this is the case, they must have not only the connector for the wall, but also another where to place the antenna of the TV itself, in addition to the cable that will go to the computer. There are models that do not have this second coaxial connector and that would not allow watching television since the antenna input would be canceled.

One of the best known products of this type is Comtrend GCA-6000, which is sold in a pack of two units and allows a speed of up to 1200 Mbps. In this case there are two coaxial sockets, so it is possible to continue maintaining the input for the TV. The price is 239 dollars.

Another model is the Screen beamwhich is also sold in a set of two with a speed of 2.5 Gbps, but with a 1 Gbps Ethernet port. Of course, in this case there is no dual coaxial output, so you cannot connect the TV at the same time. The price is a little lower, 181 dollars.

For less money we have a model of GoCoaxthe MoCa 2.5 adapter which has a maximum speed of 2.5 Gbit/s, also on the Ethernet port. However, few fiber optic connections reach these speeds. Its price is 80 dollars each.