tips to prevent it from getting damaged and the gadget that can protect it from heat

Heat can be an extremely damaging element for electronic devices. In Europe there are many areas where in summer the temperatures are quite high, which can harm the performance of our mobile phone and even break it, and if we are on vacation this can be very bad news.

Electronic devices can get hot depending on their usage and the ambient temperature also affects them. The more the device works, the hotter it will get, and when this temperature reaches 40 degrees, its components may begin to deterioratewhich makes the device last less long in the long run.

Android phones, in particular, have sensors capable of monitoring internal temperature of the mobile phone, causing it to automatically turn off if it reaches the extreme to cool down and prevent damage. This is a defense mechanism through which the mobile can be protected, but it does not guarantee that it has not been damaged.

Reaching this point can already lead to a degradation of the performance of the smartphone or tablet in question and a risk of failure. It is therefore better to avoid overheating of the mobile phone, which can be achieved by avoiding certain uses and taking certain precautions.

To know if the phone is at very high temperature, just remove the case and touch the back. However, to have precise knowledge of your temperature

The environment is important

The temperature of the mobile phone, in addition to its components, can be increased or decreased. depending on the environment to which it is exposedand it is important to keep this in mind. The first thing to avoid at all costs is leaving your cell phone in the sun. After all, the screen, when turned off, is black, and this is the color that absorbs the most light and heat from the Sun.

Whatever color your rear end is, will always absorb some heatso the less time it stays in the sun, the better. It is also not recommended to leave the phone in closed, unventilated and hot places, such as in a closed car.

It should also be taken into account that If this happens and the appliance heats up, it is not recommended to put it in the refrigerator. or a freezer, as the moisture inside these devices could also damage it. In this sense, it is best to leave it on a surface that is not exposed to heat, so that, gradually, the temperature of the smartphone decreases little by little.

Use it sparingly

When a smartphone or tablet reaches high temperatures, it is best to stop using it if possible. When this is noticed, turning it off is a great way to do thisbecause without any of its internal elements working, it will be easier for it not to get too hot.

There are times when turning it off is not possible, and in these cases we must bear in mind that some processes may consume more than others. Turn on the GPS while navigating or viewing a route, set the screen to maximum brightness or use the camera are some of them.

Therefore, unless it is essential, It is better to spend a while without using it. Battery saver mode can be a good option to ensure that there are fewer background processes running that can cause a temperature increase, although this will mean that some apps do not receive all notifications at once.

Case and charger

Not all phone cases dissipate heat properly, and that’s something to keep in mind if you’re wearing one. There are times when this can cause heat to accumulate on the back of the smartphone —which is the one that is usually covered—, so if you want to lower its temperature quickly, it is best to remove it, or change it for another that allows you to breathe better.

In this way, the “barriers” that prevent the heat released by the smartphone from going outside will be eliminated. In everyday situations this may not be very visible, but it is true that sometimes the difference between having a cover or not can be decisive.

Charging your phone is also a process during which it can get very hot. The high power of fast charging has the disadvantage of being able to heat up more. If it is not strictly necessary, it is better to avoid fast charging.which will result in a greater temperature increase than conventional charging.

In this sense, it is essential to use compatible cables and, if possible, that they are of good quality. And the fact is that there are non-certified alternatives purchased at low prices that may cause irreversible damage on your mobile or tablet. When charging, it is best to always use good quality accessories to avoid damaging the mobile in the long term.

Mobile fan

Another good option, especially if you want to use your smartphone intensively, is to buy an accessory that can lower its temperature, such as mobile fans. These are small fans that can be attached to any device which basically work by sticking to your rear and extracting heat from it.

There are many models available on Amazon, and one of their great advantages is that they are universal. Within a certain size limit, they can be easily attached to any device to cool it quickly. They usually have their own battery, so they will not consume the smartphone’s battery.

The Trilink model, for example, can be used both plugged into the network and on battery, and will allow us to use it anywhere. It is a highly recommended accessory if you usually use your smartphone to play games.