Fallout 4: This is how you get a jetpack for your power armor

In Fallout 4, a jetpack typically requires power armor unless you’re using a jetpack mod. Go to your power armor rack and select the torso and available mods. There you will see the point “Jetpack”.

To build the jetpack in Fallout 4, you need to have two perks fully leveled up. On the one hand, level four is required for “Science” (intelligence), and on the other hand, level four is required for the “quartermaster” perk (strength). You also need building materials for the jetpack:

Fallout 4: Build a jetpack – you need this material

• Aluminium: 6
• Asbestos: 5
• Glue: 4
• Nukleares Material: 7

Once you have built a jetpack in F allout 4, you can see it on the back of the power armor. Get in and press the jump button and press it a second time. However, you keep the button pressed. Now the jetpack drive is activated and you fly through the air.

Remember that you can’t fly all the time. A flight usually only lasts a few seconds. You then have to give the device some time before you can fly with the full flight time. At the bottom right of the display you can see when the jetpack is fully ready for use again. Also important: If you use the jetpack in Fallout 4, your fusion core loses energy even faster.

If you’re new to Fallout 4, you should check out our tips for character skilling and the best perks for starting the game. You are also welcome to check out our survival guide for beginners again and again.

?

Fallout-Quiz

What power armor does Maximus wear in the streaming series?

ⵙⵔT-51 ⵙⵔT-45 ⵙⵔT-60

If you want to diligently expand settlements in the game, take a look at our builder guide for Fallout 4. There you will find out how you can get more settlers and assign supply routes. We offer you an overview of all our guides, tips and cheats for Fallout 4.

• » Tipp: The best VPN providers for more security and data protection
• » Buy balcony power plant: Comparison of the best solar systems