Many users install a guide cable so that the robotic lawnmower can find its way back to the charging station. But what if the robotic lawnmower can’t find it? This is how you can solve the problem.
In order to find the charging station, the robotic lawnmower’s guide cable must be functional.
- Guide cables on robotic lawnmowers ensure that the device can always find the fastest route to the charging station.
- If your robotic lawnmower cannot find the guide cable, there is usually a problem with the cable itself.
- Therefore, check whether the connection between the guide cable and the charging station is OK and make sure that the cable itself is not damaged.
There are a number of technical devices on a robotic lawnmower that are designed to ensure trouble-free operation. These include the boundary cable, which can be used to fence off a working area for the device, or the status LEDs on the charging stations.
In addition, some models also use so-called guide cables, which are intended to show the robotic lawnmower the quickest route to the next charging station. However, sometimes this does not work properly. You can find out how to solve problems with the guide cable on your robotic lawnmower here.
How to fix problems with the robotic lawnmower guide cable
If your robotic lawnmower can no longer find the laid guide cable, this is often quite obvious. Because if the device wanders around the lawn long enough with only a little battery charge remaining and desperately tries to find the cable, at some point it will simply stop lying in the middle of the lawn due to a lack of battery charge and you have to take it to the charging station yourself – that’s annoying.
If your robotic lawnmower can no longer find the guide cable, this is often due to a defect in the cable or the connection to the charging station. So check carefully whether the connection between the cable and your charging station is not damaged and reconnect the two parts if necessary. If this does not improve the problem, then check whether your guide cable is damaged anywhere. If this is the case, it must be replaced.
If, however, you are sure that the fault is not with the guide cable, the problem indicates a defect in the robotic lawnmower itself. In such a case, you should reset the entire system to factory settings and set it up again. If the fault still exists after that, you have no choice but to contact the manufacturer’s customer service and, if necessary, send the device in for repair.
- » Tipp: The best VPN providers for more security and data protection
- » Buy a balcony power plant: Comparison of the best solar systems
Don’t miss anything with the NETWORK-Newsletter
Every Friday: The most informative and entertaining summary from the world of technology!
