The Xbox Elite wireless hand is one of the most comfortable controls to play, its ergonomics are incredibly good, and its buttons and functions convey an excellent feeling that many players want to have. Its design was made with the intention of improve gameplay and user experience, thus making it one of the best controls today.
The only bad thing is that the Xbox Elite is achieved for a very high price, to be more specific in approximately 150euros, a large amount that not everyone is willing to pay, because with about € 40 more you could buy a Nintendo Switch Lite. If this is the reason why you have not obtained this product, you do not have to worry, there is a solution that will help you save more than half of what an Xbox Elite costs. Yes, in the following information we show you how to create your own Xbox Elite controller with just € 40, and it's easier than you think.
Requirements
Before starting, it is necessary to take into account the tools and materials needed to build this controller. You may find these products on Amazon for a very low price:
When you have all the requirements that we indicate, you can start making your Xbox Elite without problems, although you must pay close attention to the steps.
Reasons to create your own DIY Xbox Elite
As we mentioned at the beginning, the Xbox Elite has more outstanding features that are very important when playing. Simply put, it is a Premium controller that it makes a difference when it is necessary to get a better experience
-
Advanced command customization.
-
Activation Locks
-
Design with Premium finishes.
-
It provides greater comfort and satisfaction.
-
Improve the experience with the gameplay.
Despite these good features, there are also some things to consider, and the Xbox Elite does not have Bluetooth connectivity, but that can change if you propose to create the controller yourself, since it is possible to add this function from scratch . Further, if you do it yourself you will know how to fix it if at any time you get damaged. Here are the steps for you to make your Xbox Elite.
How to install Xbox Elite thumbsticks on any controller
The thumbsticks are undoubtedly one of the most important parts of a controller, since these are necessary to move the characters and in turn, their camera, this is how they can move on stage. This will be the first component that we will incorporate, ElementDigital replacement kit has support for any remote, which makes it an excellent choice to improve comfort depending on your taste, since there are three types of bars:
-
Standard.
-
Long.
-
Vaulted.
These you must choose depending on your taste. On the other hand, it is also important that you have the T8 Security Torx screwdriver that brings the kit To start with the product installation. Follow the following steps carefully:
-
Take the lever tool e insert it in the opening which is located on the trigger side of the control until the parts are separated.
-
Remove the lid from the battery to the controller.
-
Inside the battery compartment will be a sticker you must break To find a screw.
-
Use the T8 Security Torx screwdriver to ** remove the 5 screws ** found on the back of the controller.
-
From here, you can lift the front control housing to visualize the interior components.
Go carefully to where the joysticks are located to remove them. Do not apply much force, sudden movements, or imbalance when removing them. -
When you have taken them out, ** add the new bars ** that you have chosen.
-
Try carefully their movements to ensure they are well.
How to install an Xbox Elite D-pad on any controller
After you have installed the thumbsticks, it is time to continue with the D-pad that you will also find in the kit. This procedure is very similar to the previous one, only with the ease that you have already opened the controller, so you will save time. In this case, you must follow these steps:
-
In the lower left where the D-pad is located, you will find a silver frame that you must lift little by little to unhook Some clips that will allow you to release the piece.
-
When you have done it, remove the D-pad carefully and incorporates the new magnetic D-pad.
-
Make sure it is well oriented so you don't have any problems in the future.
-
Insert the frame Silver and hook the clips to make it stable.
-
Place the front cover in the controller until it clicks.
-
Turn it over insert each of the 5 screws that you removed to open the controller.
-
Place the lid of the battery
-
Try the remote.
How to install activation locks on any Xbox One controller
The function of this feature is very interesting and is essential to improve the user experience. What it does is that it reduces the reception time for the reaction of the triggers, which means that the buttons are not fully pressed. This makes a difference in time savings, since the milliseconds that are invested in the reaction
-
Take the handles of the Bionik Quickshot.
-
Search the slots of intersection
-
Place them and push firmly down until you can join them with the remote.
-
Test your strength and firmness.
This should be enough for Bionik Quickshot cuffs to be totally stable and effective. They are undoubtedly excellent, and much more if you love shooters full of action and adventure.
Additional modifications
Although you have already incorporated all the features that make a standard control on an Xbox Elite, there are still more interesting things that you can add to your new controller, both aesthetically and functionally. There are other accessories that even convey a higher premium feel and comfort that will take your new Xbox Elite controller to the next level. Next, we leave each of these recommended additional components:
To install these additional modifications, you don't have to worry, since you must apply the same processes that we have given you throughout the tutorial.
Table of Contents
