Best VESA Monitor Mounts and Arms for PC or Laptop

For this reason, we have selected a list of the best and most versatile in this exclusive segment, where you will find different types focused on specific products or tasks to improve your health in the office and, of course, your ergonomics.

What elements should we take into account?

Well, although it may seem very obvious, surely many of you are overlooking at least one of the key sections that we are going to show you below:

• Table or desk thickness
• Screen or monitor size
• Weight of said screen or monitor
• Motricity of the arm or support

If we have this clear information, then we can choose between VESA mounts or monitor arms among all that we are going to offer you below.

Best Monitor Stands

INVISION MX450

This is the best mount we could find for large screens or monitors and common VESA. We are talking about an arm compatible with 75 mm and 100 mm and which supports up to 12 kg of weight.

Although specified for monitors with a maximum of 35 inches, the reality is that he is able to resist until 43 inches As long as they are not overweight.

The limitation of the screen size is given by the angles of rotation and inclination, where if we place a larger monitor we will not be able to complete what the manufacturer specifies, but logically it can be installed without problems .

These angles pass through +85º1 and -30º of inclination thanks to two extendable arms with pistons and a traditional anchoring system that will allow us to raise or lower the monitor with a total distance of 345 millimeters. Of course, its anchoring system is double, being able to use the pliers or the wire. As if that were not enough, it incorporates a USB charging port for our favorite device, all in its base, as well as an internal cable management system.

HUANUO VESA 75-100mm

It is an arm that leads sales on Amazon and it is not without reason. With the ability to support formats Head VESA 75 VESA 100 in screens and monitors, what we get for a moderate price is a stand or an extendable arm with a gas piston capable of supporting different mounting methods, either by the typical clip with a clamp to the profile of the table, or directly with a washer if we make a hole in it.

This versatility makes it very attractive, where the settings it has complement the purchase decision, since it can be tilted from +35º to -50º and we can move it no less than 39.6cm in its vertical and upwards 47cm on the horizontal axis.

Supports monitors and displays up to 30 inches with up to 6.5Kg weight.

HUANUO VESA 75-100mm FIXED

From the same manufacturer, we have a different support and with better features than the previous one, where it is also even cheaper. It is focused on a different type of user because, unlike its big brother, it is a fixed type.

This means we will have a system with the same two clamp and grommet mounting options, but there is no fully articulated arm as such, instead we have a fixed pivot where the arm at two joints engage in it.

This has its advantages and disadvantages: it improves free adjustment since we have more availability in the vertical and horizontal direction, more precisely 36 cm of column results in 55 cm of total and horizontal height gain not less, it is able to swivel of the +85º to -30º

What are the problems? The space occupied and above all the space contracted if what we want is for the monitor or the screen to occupy as little as possible such as an arm or a VESA support. The vertical structure and the first joint are fixed and compared to its brother, it is logically less narrow on a desk, hence its lower price. In return, it allows monitors or displays up to 9 kg and 32 inchesbecause its system is more robust and has a smaller gas piston.

HUANJO VESA 75-100mm Dual

There are not too many new features in this mount, as it basically follows the principles and structure of the previously named one except that now we can install two screens.

As far as performance is concerned, there are no changes in this regard, so we can be sure that thanks to its central pivot, the screens will hold without any problem, maintaining all the advantages of adjustments, tilt and rotation independently.

INVISION wall bracket

As expected, many don’t want a table stand for a variety of reasons, whether it’s space, aesthetics, or simply because they hope to keep the width to a minimum when folded. Either way, this VESA mount or monitor arm is designed for 75mm anchors (75×75) 100mm (100×100) where screen size is specified as a maximum of 27 inches and up to 7 kg total weight.

Due to their nature, angles are reduced to -50º back, +35º forward, while maintaining key capabilities such as 90º turn or full rotation of 360º. Regarding the lengths we are talking about +285 millimeters from the wall, which isn’t bad at all. Logically it is a more limited arm, but also cheaper and more aesthetic.

BONTEC 2 in 1 arm and stand VESA 75-100

This arm or VESA support is something different from what we have seen, mainly because it is double and at the same time it is a 2 in 1. And it is that it incorporates a monitor support up to at 27 inches able to support a total weight of 10 Kg thanks to its simpler pistonless extension system.

At the same time, it has a second tray-like stand designed for laptops up to 15.6 inches which will also support up to 10Kgwe can therefore work on a dual screen with our laptop or ultrabook, use our gaming PC to play while watching the image on a much larger monitor or simply work on a dual screen.

The flexibility is really good, with an inclination of +/-90º, 360º rotation and a length of both arms of up to 410 mm, something really impressive.

And so far the VESA monitor supports or arms, where as we can see there are a large number of them that surely adapt to your needs.