The codecs are noisy Dolby Atmos and DTS: X They have different sound capabilities around and support different types of hardware, so before comparing them to see which one is better, let's start by defining what it is.
What is Dolby Atmos
Dolby Atmos is a standard sound system that wants to provide a three-phase sound system. Thus, the sounds do not only come from the front, back and side of the places – in relation to the listening user – but also from above, thus adding a third dimension to the listening phase. For Dolby Atmos records, audio engineers can set a "height" for the obvious audio stream located around the viewer.
So, a helicopter landing on the ground, a gun popping up near the ear, or a cataclysm causing an explosion … any effect would greatly benefit from the addition of this. an additional additional channel.
Atmos requires the source audio to be compatible, to be played with a compatible player, and a set of compatible speakers. As an adjacent sound, the speakers must be in the correct position (with the sketch in the picture above) of the corresponding audio channel. For this reason, there are Dolby Atmos speakers specially designed to cause sound directly to the surface, so that you can get out of the attic.
If we use a standard nomenclature, a program with seven satellite and subwoofer speakers can be called program 7.1. When Dolby Atmos speakers are added, they will be added to the "end". In other words, if we had a 7.1 system on which to install four Atmos speakers, we would have the 7.1.4 program, which is definitely a reference configuration according to the Dolby standard, although there are other configurations like 5.1.2.
Finally, it should be noted that in addition to identifying the speakers and associated players, Dolby Atmos also describes the audio tracks associated with the program. Therefore, the corresponding codec is also called, specifically, Dolby Atmos. Netflix, by the way, has just added it to some of its movies.
What is DTS: X?
DTS: X, like Dolby Atmos, is a category of audio codecs used to store and manage audio data. DTS: X does not have a specific audio system like Atmos, which means it can work on just about any audio system integration you have. It uses a multidimensional audio platform (MDA) that is "free" (no money), and Atmos uses a patented system. This makes DTS: X a more legally open system than Atmos, even though it did not have a significant impact on the consumer market.
So if DTS: X doesn't have a reference set, how do engineers go about mixing audio in this format? Because DTS: X receivers have that rating system Automatically detect audio and related speaker settings is plugged in, including if there is a ceiling (something new to Dod codecs). With this "auto report", you can always translate audio input into integrated output.
DTS: X translates your desired point of origin into a three-dimensional space in a specific set of signals for your speakers. Therefore, the codec is able to place the sound very, very close to its intended location for any speaker configuration. This is greater flexibility It's a great benefit of this sound system, because it gives the user a lot of freedom.
Dolby Atmos vs DTS: X, what better sound system?
Many movie theaters already use Dolby Atmos, but they have not yet received DTS: X, in part because they have entered the market soon. Similarly, the adoption of Atmos is also due to the fact that existing Dolby Digital audio interfaces work on Atmos, since you have to add only high quality speakers.
DTS: The X can be coded higher than Dolby Atmos, but that doesn't mean it has improved. In audio tests, few or no listeners have noticed a difference between the two, and that is because the quality difference between the two is small (but DTS: X is technologically superior). In fact, DTS: X is capable of encoding an extremely accurate mathematical sound than Dolby Atmos, and yet the listener couldn't tell the difference.
Dolby Atmos produces small files with its codec because its compression method works much better than that of DTS: X, which means it's easier for manufacturers to use Dolby Atmos because it takes less disk space.
Finally, it is important to mention that Dolby Atmos has a advantage over DTS: X which can be decisive when choosing one or the other system, and that is a very broad compatibility. Atmos users can get compatible audio from Netflix, Amazon Prime Video, iTunes and dozens of movies and series in the Blu-Ray format, while DTS: X is currently only offered in some form.
Therefore, DTS: X is better and more powerful than Dolby Atmos, but if you have to choose, you have to choose Atmos because its implementation will be much easier.
