If you’re a console gamer or use a gamepad to play your favorite PC games, you might have noticed that they accumulate dirt over time. Unfortunately, due to the narrow places, it is sometimes difficult for us to clean, but if you are one of those who sweat a lot from your hands, the scum eventually accumulates. Well, it may seem trivial, but we’ll show you how. clean console controller efficiently so that you have it almost like the first day.
There’s nothing worse than being home, having a friend over and seeing how said person upon seeing the control button we leave them makes a grimace of displeasure at how dirty the controller is. In fact, there is nothing you can do, and the worst part is that if you have eaten while playing, then this grease ends up accumulating on the surface of the controller. It will also attract near-microscopic beings that will feed on it. A festival, come on!
How to clean your console controller effectively?
The main rule for keeping something clean is not to get it dirty, in which case eat Doritos first, wash your hands and then continue playing. Although it is not always possible to do so. Either way, a lot of people have a dirty controller because they don’t know how to clean it properly, not because they don’t wipe it down regularly.
We must clarify that what we are going to tell you next does not only work for the DualSense of the PS5, but applies to any other control command that you have at home.
What materials do I need and how do I do it?
Cleaning a console controller is not something that requires advanced technical knowledge, just a little patience and the right tools. Which is nothing to get excited about and you can find them at the nearest pharmacy or mall.
- First, we’re going to need both a microfiber cloththe same ones used to clean glasses and screens, as well as a jar of isopropyl alcohol at a concentration greater than 70%. We will pass the cloth through all the parts we can, don’t worry if you don’t reach all of them, the objective is to clean the general and moisten the areas where dirt has accumulated.
- In the joints of the case, this is where rust usually collects, take a wooden toothpick , like the one used for food lids, and go over the joints, while with the microfiber cloth you clean what you take out. An option that is also valid, but not done with the one you use for your oral hygiene, is to use a toothbrush, especially automatic.
- In order to clean the triggers and the upper buttons, you can do it using the materials of the previous point, but we recommend the use of ear swabs soaked in isopropyl alcohol which we will use to thoroughly clean the button panel and connections.
- Once you have everything clean, wipe it down with a completely dry microfiber cloth.
In any case, it will not reduce the wear of certain parts, such as the spring that allows the triggers to move, as well as the analog sticks. In this case, you will have to replace these parts with others, which is a different update process.
