After all, the keyboard is one of the most personal of PCs in the sense that not everyone is comfortable with all kinds of keyboards. You may not have bought the best keyboard for this preference, or we may have your time and you are still not satisfied with how it works and you want to search for "one step further." In any of these cases, we will show you some modifications that will improve its performance.
How to improve keyboard replacement
Let's start with some changes regarding the changes. In this case, it requires you to completely unplug the keyboard, so be aware that making any of these adjustments will completely make your guarantee and what else you can do, if you don't think about something. Therefore, if you plan to do so, it is at your own risk.
Fill the swap
If you notice that the replacement is not working as they did at the start, it may be that lowering and lifting more often over time will result in overlaps in some parts and may be lower and climb better. The best way to fix this is to switch on the switch.
To do this, keep in mind that you have to remove the switch by switch, so that you can apply the lubricant to the sides of all the plastic parts (which come up fine and therefore have friction).
In fact, since you are going to distribute the plastic swimmer parts, it is not a bad idea to take advantage of the springs. They don't have much wear due to collisions, but as you wear it won't hurt.
Change stability
Cherry MX machine watches have durables that tend to keep them broken. Fortunately, this is a clip that can be changed if you are a little crazy. In the following image you can see two switches, the left one has the right stabilizer, and the right one is broken. The key without stability will be "dancing" too much and will get worse when pressed.
Put stickers on the change
The "layings" of the changed machines have two pieces, and eventually pressing them often end up separating and, even if attached, they can move and cause a "dance" switch, such as when hard workers are injured but in a wonderful way. In this case, they sell some sticker stickers that we can add to keep this from happening.
These stickers are so called because they are stickers (sticker in English, of course), and there are different colors that, in the case of a lighted keyboard, can be used simultaneously to extend or toggle.
Replace springs
Swap springs are certainly the most versatile part, and although they are also highly resistant, they can eventually soften and change the touch of the keyboard. Fortunately with this one is also a piece that can change, and we will actually be able to buy springs with different operating capabilities than they had in the beginning, better adapting to our preferences.
Other modifications to upgrade the keyboard
There are additional modifications that can improve your input keyboard, and that doesn't mean that it should be separated by a switch. For example, one way to reduce the noise it makes is to insert a thin layer of thick rubber under the PCB.
When you hit the buttons, the button goes down and hits the stop position, so you can imagine that this is pointless, but nothing else goes on: you hit the stopwatch, which is holding onto the PCB, and the PCB is the base of the keyboard. Finally, sound is transmitted to all parts of the communication.
If you don't have foam rubber in hand, or your fuse rubber is too big and doesn't fit the keyboard, you can also cut a clip (the same rubber used to hold the bullets in the floor) that will do the same effect, because after all we want to add sound. In fact, if there is enough space, it is important to place both materials (foam rubber and this).
Table of Contents
