Except in special cases, no one uses ink boxes for their jet printer so continuously that they disappear before drying out. Likely, you will use the printer a few days later in the month. There may be a month you don't need to use. In this respect, i laser printers they are much higher than inkjet, because we can leave the toner permanently in its drum, without fear that it will dry out.
Of course, you can always buy cardboard compatible with your printer but, nevertheless, it is annoying to toss an ink cartridge that has never been used. Because, when the ink dries, it doesn't mean it will dry out. And the cartridge ink nozzles themselves tend to stick, and cleaning them is never an easy task for the user, often. Not to mention that there are manufacturers that can make your printer obsolete with compatible boxers, overnight.
Leaving print ink in your fridge is the solution to these problems
The process we will explain to you is best prevent print ink from working. It is an easy process to follow for any user.
The first thing we will do is remove the box Our printer and clean your injections with wet wet paper. It is important that it is wet only, not wet.
When we have them clean, we will seek a a plastic bag in a very small size. Also, if it's a bag that can be closed with a snap closure, then it's best. In this case, the free bags sold at other retail outlets and supermarkets will work perfectly for you.
Now, we'll put the printer's ink cartridge inside the plastic bag and put a piece of it in wet paper on top of the injections, protect it with heat paper.
We can't just use the heat, because the attachment you are using may come in injections cartridge, which can interfere with our inkbox storage system.
We will now continue to put the ink cartridge inside the bag we mentioned earlier and will keep everything inside us in the fridge
Do you VERY MUCH It is important that the cartridge is kept in a convenient place injections stay on their backs, to avoid scratching the ink or, in the case of cartridges with several inks, mix with them.
When we want to use the printer, we have to remove the cartridge some time before, with the intention that she is a star slightly angry before starting to print. And, before we start printing what we want to do, it's a good idea to do it test test, to make sure the cartridge works properly.
And we can leave the cabbage in a room temperature
If you don't want to leave your cartridge printers printer inside your fridge, or are one of those who need to start printing faster and can't wait for the ink to get heated, there is something else the way
The process is similar to the one we just saw to the point of keeping the ink box in the bag. However, in that time what we will be doing take out all the air it is possible for the bag to close it completely, because what we want is that moisture cannot escape inside the box and contains it in the bag.
He box We will keep it in a closed area and protected from direct sunlight. Also, like when we store it in the fridge, we will make sure that the cartridge is with the upstream feeders, for the same reasons we mentioned earlier.
In this second way, the thing we have to do is check, weekly, that wet paper We often sign the injectors and keep the ink inside of them moist, wet. Once it is dry, we should replace the original with some wet paper.
