Even if the faux leather headphones They have several advantages over the fabric ones, their main disadvantage is that if you don’t take care of them, this skin will eventually peel and become damaged, rendering the headphones unusable until you change the earmuffs . If you want to avoid having to come to that, in this article we are going to tell you what are the care you need to perform to prevent the skin of the helmet from eventually being damaged.
Of course, and before going into the detail of the maintenance that you must perform on the headphones to keep them in good condition, it goes without saying that periodic cleaning is essential, and it is something inherent whether they are in leather or fabric, since it contributes to considerably increasing their longevity and they are always in good condition.
Here’s how you should take care of your headphones’ skin
The leather of the headphones is 99.9% synthetic leather, which means that it does not have the same resistance as real leather (which, by the way, requires even more care to keep in good condition) . Although this is something quite obvious, the first thing we would advise you is that although most headphones earmuffs can be taken apart, do not put them in the washing machine as this will irreparably damage the material ( if they are made of fabric, they can be put in the washing machine). washing machine, but with cold water washes, yes).
That said, the second factor to watch out for is not exposing your skin to excessive heat: this means not leaving your headphones near a radiator, and indeed if you have them hanging in your PC case. , avoid leaving it in a hot air outlet grille. In short, heat can damage the skin covering the pads in the long term, so it should be avoided as much as possible.
On the other hand, and especially in summer and/or in environments where it is very hot, it is necessary to be careful with perspiration, since liquids will also damage the synthetic leather. If you have no choice but to wear them in the summer and you sweat while doing so, try not to wear them for long periods of time, at least without drying them with a clean, dry cloth (that’s i.e. periodically remove the sweat so that they do not stay wet for a long time). .
Likewise, whether you wear glasses or earrings, you must be particularly careful when putting them on and taking them off (the same if you put on and take off your glasses with earphones) because friction and sharp areas can damage the coat ; always try to lift the earmuffs or remove the headphones before putting on or taking off your glasses, and if you wear earrings, try not to put the headphones on by “sliding” them on your face, but gently placing the earmuffs over your ears.
Another advice in this regard: try to use the earphones the way they were designed…it is very common to see users wearing the earphones over a cap, hat or as you can see in the picture above, over their hair; If you do that, you’ll wear down the skin of the headphones unnecessarily and they’ll last less in good condition (plus you’ll ruin the listening experience no matter how much you think they stay in place like that).
Finally, and to maximize the life of your synthetic leather headphones, it is recommended that you moisturize the leather from time to time (depending on use, once a year is a reasonable timeframe) to prevent it from becoming dries out and does not crack. For this you can use leather softener, horse grease or in general any product to moisturize the leather (it is the same as you would use for a leather jacket or boots).
Below we leave you the product that we ourselves use for it and that we know works well, in case you want to buy it… it’s quite cheap, it works well and it also works for any type of leather or synthetic leather, so it doesn’t hurt to always have a boat at home.
In this article, HardZone includes affiliate links for which a commission is received which does not affect the user in any way. These purchase recommendations are independent, without agreement with the brands.
