There are two ways to do it simply, both are perfect but each of them is perfectly safe at every level. We're talking about calling Hot swipe, also called Hot connection, the most widely used technology but that is not entirely accurate depending on what equipment or power is provided.
Therefore, we will supplement this with a part of the hardware to ensure real and secure removal.
Hot plug or Hot plugging: a free and secure option
We've already talked about these technologies, which are currently being represented and included in most market reports of some sort. To complete this article we must enable it because it is the first step or first layer of security that we must complete in order to secure a safe.
We'll simply go to our BIOS either UEFI, in the section for PCH or chipset, where we will find concrete options:
Do not confuse Hot Swap or Hot plug with similar parameters Aggressive Coordination Power Management, because although both refer to power, one does not cut the supply of this and the other only reduces it, so our HDD will continue with the next risk of disconnection.
Once we have updated the Hot plug and are maintaining the repair to UEFI, touch the second step, which will ensure that we have no problems due to power leaks or similar.
Hard drive self-drive controllers
This option will cost us money, but it is the best and most similar to a high performance server. It means an external and independent controller that powers hard drives, so that Hot plug will send an HDD connection order and we We can turn off its power from the controller.
There are many, but the most recommended ones are undoubtedly those with independent and external power supply regulation, to provide power, but said the regulator is responsible for allowing you to rotate and turn off hard drives, the Middle Bridge.
Some of these drivers have multiple units independently, so this would be more cost-effective than extending standard PCs.
In addition, they have a dual functionality, since they not only work when we want to remove HDD for a variety of reasons, but we can extend the same life by stopping it when we don't need it.
This improves the overall length of the simulation, reduces equipment usage and the temperature of adjacent disks, so, they are all services, because they have the functionality of an outdoor pool without any problems with this or the space available on the table.
A hot plug and controller is the safest option for this spread, so if you really need to switch to hot removals and streamline your data, a small amount of money makes us totally in tune with HDD
