The first thing we must make clear is that this installation process is the same for all AMD Threadripper cabinets. It doesn't matter if they use them TR4 socks (for the AMD Threadripper 1000 and 2000) or TRX4 (with 3000 models). Since the design method is the same for both Socks
The thing that separates the a meeting of the AMD Threadripper for other operating systems, that they use a torque wrench. This type of wigs allows you to give the socket screws the correct pressure, without being able to get through them. This button is included in the processor box. And it is very important not to give up, in the future if you want to change the processor to another model.
How to configure the AMD Threadripper socket storage system
The first thing we will do is keep the socket AMD built on Threadripper
You can see that there are three screws holding a metal number, next to the screw. In fact, in addition to the socks keeping program, order to tighten and / or release screws during the processor assembly. So, to activate the processor, the order by which we should be released with screws is 3 -> 2 -> 1. All scales are inmates, so there is no risk of losing them once they have released them all.
When we release the screw number 1 (the last we need to release), we can lift storage system the processor.
By performing this step, i a dress where we have to install the processor. This dress should be lifted at this time.
We will continue to issue clear plastic protection, so that only the remainder can be left directions which will work to install the processing center.
Now, we have to remove the plastic cover that protects the pins Isaac
We should have happy care, because there are a total of 4094 pins for this type of socks. And we all already know how fragile the LGA sockets are when they are destroyed.
How to install and secure the processor to the socket
The next step is to take install the processor in the direction we mentioned earlier. Be careful not to fall into the socket as this can leave the motherboard completely invisible. It is also a failure that does not include a product warranty.
As long as we have a processor in the guide, we will lower it until we connect the socket pins. Also, to leave it insured, we'll use both clips It is painted blue.
We'll just have to confirm Both clips down (look at the motherboard) until we hear or notice by clicking on the backup.
Now we're just left let them draw near completely a system for maintaining the foundations.
It is for this that we have to apply torque wrench which provides AMD with the Threadripper processor. Therefore, we will follow the order 1 -> 2 -> 3 to strengthen all the scales.
With all the solid aging, we can only set you have hot spots to the processor and install a heatsink so you can use it.
