The processor mentioned is Quad Core with SMT, so they are 4 body strands and 8 threads and are based on Zen 2 architecture with 7nm graphics. The base frequency is 3.6 GHz and the Boost frequency is 3.9 GHz.
The AMD Ryzen 3 3100 overuls, or how you get the last one is not a failure
When looking at CPU-Z image validation, the most important fields are:
The usually they determine the maximum frequency reached by the processor, in this case we are experiencing a frequency of 5923.62 MHz. electrical energy a higher frequency can reach the processor, because at higher values we obtain greater stability of the cores when performing OC.
Regarding kind of memory, in this case we see that the configuration is single Channel which means that there is 1 module of RAM installed on the system.
Small frequency of memory Lower pressure means the IMC is integrated into the processor. The times, They are also important because, as is often the case, low-aggressive or aggressive areas also reduce BMI pressure.
Motherboard board model in this regard and as important as X570 chip from AMD's higher range, which includes standard VRM so ensure better power delivery (and more stability) for corals.
The UEFI In this context it is also important that January 2020 means that this board of women does not use the latest version of AGESA.
With moderate volume it was able to touch 6GHz
Similar and higher-quality features have already been achieved before with Intel Quad Core processors, although Intel CPUs have higher mobility capabilities, with AMD itself holding a world record of frequency with its FX 8350 model from the hand of overclocker Andre Yang.
Being different processors, different structures and different configurations are not compared, so only their waves can be compared to see what is the maximum number.
TSAIK, the same overulser that received this record 5923.62 MHz Previously you had access to the $ 749 Ryzen 9 3950X (title mark) 6041 MHz image.
To achieve this outbreak, it has required cooling with liquid nitrogen and a lot of work to keep the motherboard from wet, so that, even with the conduction produced, it does not end up damaging the parts.
In the case of the Ryzen 3 3100 used for this hosting, we're talking about a € 99 processor and the "worst" AMD currently makes in the 3000 series. We say "too bad" because it has proven to be a respected processor for all users who want a cheaper CPU for games.
Nice overbacks may soon be overlooked
This means that expanding the processor with open-source queries is always open 51.87% over the industry and can be considered, of course, a record. We start from the 3.6 GHz base and 3.9 GHz in Boost, up to 5.923 GHz for this record.
To avoid compressing the IMC processor to achieve authentication on the CPU-Z, opted to use one 8GB of memory module on Channel One with high capacity. The RAM frequency is 799.8 MHz with an active frequency of 1599.6 MHz and the CAS is CL11, so memory access is 13.75ns, which is the highest latency.
The designated mother board includes UEFI based on AGESA 1.0.0.4B or earlier as written on January 4, 2020.
The processor power is fully conserved because all the cores are enabled including SMT so if you want to achieve the highest record, you can only save the best cores of the processor, disable SMT and refresh UEFI to AGESA 1.0.0.5 provides greater stability in the system as this AGESA promises higher compatibility with these 2 processors. There is also the magnitude of increasing the vcore to reach the most common numbers.
