It's an obvious question, but at the same time the difference between skipping the freezer limit or not being able to do it. We talk about the fact of heat, which determines on all aspects of binge drinking.
In extreme terms, this should be considered in two distinct steps: those elements that will be due to the LN2 and room temperature. And is the worst enemy of hardware in this type of overulss is excessive recovery, which results in the purchase of some hardware to protect Hardware from it.
Materials and preparation are key to overuse with LN2
Excessive cold temperatures and existing room temperatures will result in poor reimbursement and uncomfortable difficulties for our PC. So, what we want with this tutorial is protection and hardware.
As with any recommendation, everyone uses what they think is best for them, and in the extreme they won't be the least, especially since there are so many things to do with proper installation.
Wetsuit
It is cheap, easy to obtain, compact, can be cut without problems and its cleaning is as easy as it is quick. Being a type of synthetic rubber, it will require a long time of preparation and the highest precision we can achieve, because the water produced by condensation fits into any gap and therefore the cuts we give to neoprene must be the most perfect fit for hardware such as gloves.
Dairy rubber putty (Hidden eraser)
It is the type of rubber used by artists for various tasks. From painters to craftsmen to fine art, we talk about the rubber-based materials that work in rubber. Their main task is to find and collect graph and carbon particles.
It has the advantage of saying that much is flexible, does not leave a residue, is effective and easy to clean if we do not allow the heat to reach temperatures much higher than the surrounding area. Its major drawback is that it is expensive somehow and that we will need enough for the entire motherboard.
Plasti-DIP liquid rubber (liquid vinyl with rubber base)
It is a type of spray paint used to blend materials and protect against adverse weather conditions. As a good spray and performance, we will need to cover every motherboard that contains or may contain Hardware attached to it, because if the paint enters your contacts we may have a future problem.
Once it's dry, we'll have a and flexible rubber, tasteless and non-slip rubber. Its problems are its price and its difficulty in cleaning itself.
Petrolatum or dielectric grease
With a soft brush there is no doubt that the method of filing at a very low error rate is within the overuls with LN2. It is also a cheap way to spend time protecting, it is ris faster to apply, cheaper and more secure.
Logically the problem is cleanliness. A motherboard full of silicone in all its holes and elasticity is not an easy thing to clean. There are overulsers that due to their unwanted dielectric properties and staying in regular oils have problems in some parts, so it is better to select certain water-soluble elements and ensure electrical reliability.
Table of Contents
