For those of you who do not know what we are talking about specifically, we recommend that you update the article with hot glass or warm glass (both terms are welcome) because we will start from that foundation to speed up the process a bit.
As far as their systems are concerned, the industry uses the word glass more, while the average user calls it glass. This is important, because the description and description will be discussed as hot glass as it is refined and detailed, which is required in this document.
Warm glass types used in PC cases
We must first say that ALL glass used in the PC industry is burned, because manufacturers have to offer endless products and even though they are sold as glass, most are not hot.
The first thing to be clear is that between regular glass and warm glass there are a series of steps to follow and various price-raising procedures. As a rule and although not documented, for easy safety, manufacturers should provide hot glass in their PC cases, because violations of one type of glass and another are not the same and involve risks.
With this initial introduction and entry into the matter, at present the industry and manufacturers are working with two types of warm glass: thermal and chemical. Although it makes sense that they belong to the same family, no manufacturer currently specifies the type of noisy glass they use, something that should be done for obvious reasons as we will see below (commenters). personality).
Warm hot glass
As its name implies, hot glass is a kind of material that is more resistant to mechanical than ordinary glass, a 400% more, where the determining factor of their temperature is above 700 ºC.
After heating, the glass becomes subjected to a rapid cooling process by both sides so that its outer layers are active, and thus, the inner layers remain hot for longer periods of time and are able to cool slightly.
This process allows the glass to crack, but not deteriorate in the case of dangerous and sharp speeches. If the impact or impact is too strong, the glass will be broken into small pieces with suitable circular edges, where the user cannot cut or damage.
Chemical-sounding glass
It is the most advanced type of glass in the industry, because it requires a series of highly advanced processes and at different stages than the hot ones. So, you get it 2.5 times more resistance to excessively hot glass, high mechanical resistance in terms of flexibility and allows for near-zero reverse 0%.
Logically, it can be made drawn, curved, curved, circular and almost any turn can be made. Therefore, it is an expensive glass to be manufactured and one that meets the pressure well, but on the other hand it is not considered a safety glass, since its use is completely different from thermal.
If broken, they create rough edges and edges of the user and can be broken into various parts of different sizes. However, it is the most used in cases of high-end PCs, as it is able to show the interior with good integrity.
