Phanteks Evolv Shift 2 ARGB
This case is the evolution of the brand’s award-winning Evolv Shift, which allows for high-end hardware configurations while taking up a fairly small amount of space given the interior is arranged to expand vertically (i.e. say it is quite tall and in fact it is 590mm tall). It supports mini ITX form factor motherboards and SFX and SFX-L power supplies nothing else, but instead has a factory PCIe 3.0 x16 riser card and has room to install cards graphics up to 335 mm long. Of course, the maximum height of the radiator is 59 mm nothing more.
Other than that, this case supports a total of three 120/140mm diameter fans and even a 120mm liquid cooling radiator if desired; Also supports one 3.5 inch hard drive and two 2.5 inch hard drives.
Phanteks Enthoo Evolv X
This is the best-selling box from Phanteks, and now we have it for sale in different colors. Its dimensions are 240mm x 520mm x 510mm and it supports motherboards in E-ATX format and below, with ample space for cooling, as in fact it includes three preinstalled 140mm fans. as standard (one at the rear and two at the front). Supports graphics up to 435mm long, CPU coolers up to 190mm high, and power supplies of all sizes.
Of course, this case has a tempered glass side, USB 3.1 connectivity on the front, and a 3.5-inch 4-drive rack that can be removed if not in use to promote better cooling.
Phanteks Eclipse P400A
This case belonging to the Phanteks Eclipse family supports motherboards in E-ATX format and below, graphics up to 420mm long and heatsinks up to 160mm high. It stands out without a doubt with its three included fans at the front with ARGB lighting, and it has room to put two higher and one more (necessary) at the rear.
It stands out with its white mesh front and tempered glass side, but you also have to consider its front USB 3.0 connectivity and the large number of dust filters that will help keep the inside of the box clean.
Phanteks Eclipse P300A mesh
Also from the Eclipse series, this inexpensive box is ideal for users looking for a quality box without spending a lot of money on it. It supports ATX and lower form factor motherboards, graphics up to 355mm in length, and CPU coolers up to 165mm, so you can even install high-end models. As standard it only includes a 120mm rear fan, but it allows two more 120/140mm to be installed in the front and another of the same size above.
Phanteks Eclipse P200A D-RGB
This is a case which, although it is also part of the Eclipse family, is actually in the mini ITX format and you may have already realized this because the hole for the power supply is at the top. Therefore, it supports mini ITX and mini DTX motherboards, but the font we can install on it can be standard ATX size. As for the CPU heatsink, it can measure up to 165mm high (if the GPU is not installed, if it is, up to 92mm) and graphics up to 355mm thanks to a PCIe riser card included.
This box has a total of 7 ventilation holes, although it is true that it only includes two D-RGB 120 mm at the front, but be careful because despite one side in tempered glass, on the other it supports a radiator up to 240mm in length.
HardZone uses affiliate links for these offers which provide a small commission, but in no way cost the user making the purchase. By purchasing through these links, you are helping us keep working.
Table of Contents
