The cord management It's a work of art. We can use students to plot and take strings wherever we want, which will give us the opportunity to open the hole and turn the strings as often as we want, but there are other ways that can, although they are cheap and leave a better result, somehow lasting in some cases. Today we will show you one of these alternatives, which contain line the wires better desktop editing.
The materials needed to move the wires
When listing cables there are two options: an option to use items that we can buy at any computer hardware store or online store and that allows us to use and modify cables, or a permanent solution containing a combination heat shrink tube (Actually it is not permanent at all, we can always open it by making a loop with a cutter and pulling it, but this one spoils it, it can't be repeated).
This is what you will need:
- A meter or similar, to measure the length of the rope and tube.
- Cutter, scarf or similar to cut tubes.
- Pairs (optional).
Of course you will also need to cable cover If you decide to choose a non-permanent option, or choose a permanent solution (preferably, all said) to sort the threads, you will need heat shrink tube and a heat source such as a small blowtorch or a powerful machine.
In the shrink tube you have many options, so you first need to know which cables you want to edit, their length and width you will need to be able to install even the connector through the tube. It has different lengths, diameters and colors to choose from.
How to move the wires
If you have made a choice reusable cover, how simple the line is as long as measuring the length of the rope and cutting the bed in size. Has velcro & # 39; closure & # 39; cables, so you don't have to worry about the width to get the connectors inside.
Yes, you have so many other options for cable cover, but of course those in the type of dock are not recommended because in the end the cables eventually come out and, luckily, they are not.
If your chosen choice is for a hot tub tube, you should also first measure the length of the strings and cut them in size. You can put a few cables in the same tube if they have enough thickness. If the diameter is not large enough to connect the connectors inside the tube, you can cut it lengthwise and nothing happens, for then we warm you up and come together in unity.
Once you have the wires inside the heat stroke tube, you should start heating it with a torch or lamp. Be very careful with this, because you will know that from the moment you start to install a little heat the tube starts to shrink, keeping up with the position of the threads inside.
So, you have to make a lot of passes, turn the tube in to heat the whole place, and don't keep the heat source held in the same position for more than half a second, because otherwise you can burn it.
Now, scheduling threads!
Once we have the threads inside the tubes, it's a matter of organizing the "fat" strings left, the easiest task from now on is that we will have to replace one cable to a separate thread, and we can use it from simple pins from the table to the cheeks, passing through many other options when your imagination is limited.
Thanks to these techniques, we can have the best quality desks, without the cables aggressively.