Expertise of the oceanic technology of the Seonic Prime Fanless XT-700
| SeaSonic Prime Fanless TX-700 | |
|---|---|
| Potency | 700 W |
| Efficiency | 80 Plus Titanium |
| Form factor | ATX 12V |
| Dimensions | 170 (Ln) x 150 (W) x 86 (H) mm |
| Fan | No. |
| It's modular | Yes, fill in |
| Connectors | 1 x ATX 20 + 4 pins 2 x EPS 8 pins 4 x PCIe 8 pins 6 x SATA 5 x Molex 1 x Floppy |
| Types of cables | With motherboard protection mesh, processor and graphics. An apartment cord |
| Heat | Up to 0 to 50 ° C |
| Fitness | 150,000 hours |
| Protection | OPP OVP UVP OCP OTP SCP |
| Warranty | 12 years |
| Rail +12 V | 58 A (696 W) |
| Rail +5 V | 20 a |
| Railway +3.3 V | 20 a |
Features of SeaSonic worthless fonts
Until recently, the biggest power the SeaSonic produced at its maximum power was 600 W. Which, of course, is the maximum power generating power for a typical fan, and that's all cool with transfer of heat produced from the source material.
In fact, to find such a truth, SeaSonic has had to build its own inhuman font Efficiency 80Plus Titanium. You know that this is the highest current efficiency of the power supply, allowing up to 96% efficiency when converting energy into usable energy, losing only 4% in thermal energy.
The exterior of the fountain, as you can see in the pictures, is made up of a large grid that allows air circulation without any obstacles. In addition, in its former location is everything cable connectors source, because it's a completely standard model.
SeaSonic source will use flat cable for its connectors
As you can see in the previous picture, the value of connectors which gives the potential for the source to users quite high. In fact, this source allows up to two EPS + 12V power cables to be connected to motherboards that need to supply extra power to the processor. It also has 4 wires with an 8-PCIe connector, which is intended to enable multiple image processing on PCs for users using this type of configuration.
The SeaSonic model, as you can see in the previous image, is used strings with messages connecting the source via a whiteboard, and a graphics card. However, all the other cables come with this model of the flat type, usually preferred by the users when it comes to hiding the cables inside the PC. You can also see that, instead of plastic packaging, the company has preferred to include as accessory, Velcro strings for cord control in our box.
Interior power supply is highly regulated aluminum heatsinks, it is necessary to take advantage of the infiltration cycles within our box. And a very clean interior, precisely for the reason just mentioned.
Although SeaSonic does not provide type data internal topology Using this source, you may be a DC-to-DC model. That is to say, it is a model that starts by converting all the voltage from the wall into 12 V electricity and then, taking the other voltages the PC needs for its operation.
Price and availability
Explained
Table of Contents
