Technical specification of SilentiumPC Signum SG1V TG ARGB
| SilentiumPC Signum SG1V EVO TG ARGB | |
|---|---|
| Type | Seminar ATX |
| Dimensions | 447 (H) x 216 (W) x 485 (D) mm |
| Materials | SPCC steel, ABS plastic |
| Weight | 5.1 kg |
| Color | Black |
| Motherboard board compatibility | ATX, micro ATX, mini ITX |
| Heatsink consensus | 161 mm |
| Image compatibility | 325 mm |
| Source Consistency | 160 mm |
| Cable management | Not limited |
| 3 x 120 mm (inserted as usual) | |
| Followers are followers | No. |
| Ceiling actors | 2 x 120 mm, 2 x 140 mm |
| Followers in the background | 1 x 120 mm (inserted as usual) |
| Florist followers | No. |
| Dust filters | 3 on the front, one on the roof and under the power supply |
| Front radiators | 120, 240 or 360 mm |
| Roof radiators | 120 or 240 mm |
| Rear radiators | 120 mm |
| Floor radiators | No. |
| 5.25 "bays | No. |
| 3.5 ″ bays | 2 |
| 2,5 "bays | 2 |
| Elastic Slots | 7 |
| Formerly I / O | 2 x USB 3.1 Gen 1 2 x 3.5 mm mini jack |
SilentiumPC box features
The SilentiumPC Signum SG1V TG ARGB box is a model for seminar ATX
He inside boxing is tricky. Both of these interior and exterior are painted in black matt and in the right area of the base of the shelf insert are three holes that allow the passage of cables through it.
After the riding tray is where we will find i bays Finally the units: 2 of them are 3.5-inch or 2.5-inch drives, and the other two are only 2.5-inch driving modes.
It is here again that we find a hub fan ports and ARGB power. Up to 5 fans can be connected to this fan hub, which is the same number of ARGB bases the hub supports. This hub is connected to a Nano-Reset ARGB controller that can be connected to the motherboard compatible with the case, such as ASUS models, and its AURA SYNC, ASRock POLYCHROME or GIGABYTE RGB FUSION 2.0.
The SilentiumPC box uses a large front grid
Speaking of ARGB, the SilentiumPC box features, as usual, via four 120mm fans, all compatible with the ARGB light of the box. Three of them are located in the front, behind a large stone-made grid, and the third is behind the box. In addition to these 4 fans, the user can install two other 120 or 140 mm boxes on the roof to further enhance the cooling of the equipment.
Interestingly, in response to the current manufacturers' process of building a solid front panel, SilentiumPC has decided that its Signature SG1V TG ARGB box should be used front with a neatly trimmed grid, as we all know that the former type tends to improve the cooling of the interior, by increasing the flow of fresh air from the outside to the inside of the box. Even more so if we choose to install these two fans that can put a box up on its roof.
Of all these air conditioning and shops, the Signum SG1V offers two air filters: three of them are located on the front, one on the roof of the roof and the other on the ground.
He I / O This case is basic, since it consists of two USB 3.1 Gen1 ports and two 3.5mm mini jack connectors, which are intended to connect headphones and microphones.
Price and availability
Determination
Table of Contents
