More and more devices are connected to each other at home, and not only via a wireless Wi-Fi connection, but in many cases, it is necessary to perform wiring on the router for maximum benefit.
This is the case of SmartTV, video consoles, any PC computer and PLC devices that allow us to extend the range of Wi-Fi action to the point where the router is located at one point away from the house so that only the shaded or uncovered areas will end up.
This allows us to run free Ethernet connection ports on the router, with the need to use a modified port, hub or controller to increase its connection points.
Next, we’ve selected a whole series of compatible hub switches and existing hubs on the market, which you can use near your home router to increase network connectivity.
The best replacement with the 2020 hub
TP-Link TL-SG1008D
Like many manufacturers, TP-Link offers replacement with metal and plastic body parts. This plastic is very popular and familiar.
Ports of TL-SG1008D, as expected, you're still behind, and the work lights are in front. Therefore, the wires can be moved in a more orderly manner than leaving the front of the device.
Unlike the others discussed here, the power output is at the rear and not at its sides, which is also allowed by the more efficient cord management.
If necessary, SG1008D It can be mounted on the wall as well, and, TP-Link is better built than many others in its category, as the cable output tabs remain accessible and not exposed to the wall.
Its price is cheap, however, you may not need many ports, so you can choose the only model 5 in the port at a slightly lower price of just € 12,99.
Zyxel GS-108BV3
He Zyxel switch It is quite unusual as it is introduced in the metal body, but unlike most of its competitors, it keeps ports and power connector in the background, leaving the LED status indicators in the foreground.
One reason it is unusual is because it provides QoS at certain ports. Ports 7 and 8 are very important devices, such as a media transmitter or anything that relies on low slopes.
On their own, ports 6 and 5 are marked by intermediate devices. The other four are all other devices, in addition to connecting to your router.
We also have brackets so they can be mounted at some point on the wall, or placed under the desk drawer, but keep in mind that the network ports are fixed to the wall.
Its termination does not particularly increase the purchase price, which is good, with the incentive that the manufacturer offers a full five year warranty. So GS-108BV3 It keeps the entry price very attractive.
Netgear GS308
Netgear has a popular alternative between manufacturers of switching and communication solutions and that makes and adopts market connectivity solutions for domestic or domestic use.
We chose to select the metal version of the GS308 with our best replacement articles and cables, from damaging the model with plastic wrap (model GS908), because the gaps don't seem wide enough to accommodate a standard network cable.
Therefore, i Netgear GS308Like other metal switches, it has its own ports on the front side of the LED status indicator, so while many may look unpleasant to the eye, they are easily accessible and easy to carry.
Hidden inside or behind the TV screen, it's not a problem and, as expected, doesn't have a fan to ensure quiet performance. Finally, it can be mounted to the wall if necessary.
D-Link GO-SW-8G
The unchanged version of D-Link is very similar to that of the TP-Link brand. You can choose the type of instrument, where the ports in the foreground, or the plastic that is usually better suited to home use areas, are back ports.
You can pick it with its white finish, unlike the tonic of these devices, which are usually in black or black tones, but keep in mind that the output is located on the left side, not the side later.
Like all D-Links, GO-SW-8G It does not have an active cooling fan, resulting in silence. It also uses very little power: only 3.5W and there is a type of five ports called D-Link GO-SW-5G That's a little cheap.
Trendnet TEG-S50G
The uncontrolled TRENDdnet switch comes with eight port ports and a metal finish. For those on the analysis, it is the cheapest one you can find, so if you need 4 ports or less, this should be your choice.
Yes, it's true that it is a hub hub with five ports, but don't forget that one of them will be used to connect to your main router, so there are four active ports left.
With the figures revealed by TRENDnet, its metal body is quite impressive, but keep in mind that the power connector is on the side, as in the D-Link model.
Indicate the lowest price of TEG-S50G it does not prevent it from guaranteeing, like everyone else, quiet operation, low power consumption and that its configuration completely plug-and-play to facilitate its execution.
In addition to the choice of domestic properties, the product has many other, similar models TPE-TG80G but with 8 PoE + ports whose connectors also transmit power to IP cameras or devices that support it.
Note: We may receive a small commission for each purchase made through the links on our site, but this will not incur additional costs to you. This also does not affect our freedom of organization. More details
Table of Contents
