The Alta F1 box is not a small model, precisely. Its outer dimensions are 555 (H) x 220 (W) x 462 (D) mm. And anyway, it will only support the motherboards in the ATX format. This is because the manufacturer has decided to leave enough space at the bottom and top of the box, so that its fans can breathe easily. Exhaust all the hot air inside.
The first song SilverStone has made in its old Fortress boxes, can be found in the form of electrical energy. This is positioned in the exact position, behind the Alta F1. The source absorbs air from outside using the black mesh we can see in the previous image. This will also prevent it from getting dust from the floor of our room.
Sche forward It is completely sealed by an aluminum plate. On its right side we see I / O box, which has two USB A ports, one USB C and a larger jackphone.
The SilverStone Alta F1 allows for 180 mm fans
As we have already noted, i followers the new Alta F1 will be available in the lower and upper part of the box. For the purpose of building a «Chimney effect»
As you can see in the previous image, bottom and top, there are guides where you can install box fans. SilverStone ensures they can be installed fans up to 180 mm inside: three floors and three on the roof.
On the roof of the box we can add a radiator up to 360 mm. But we feel that we must carefully choose the magnitude of this and that of its followers. Because they can conflict with the connectors from the cardboard and expansion cards we put on the computer.
Regarding the expansion cards, as you can see, the Silfon Alta F1 will allow the installation of a graphics card in vertical position. Or, this, we have to buy our own laugh PCIe x16 card.
SilverStone has not yet decided on setup box understanding. On the other hand, they are reluctant to include the RGB LEDs you can see in the pictures of this box model. If so, if we add 180 mm fans, they are there price It can easily reach 200 euros. If you decide to sell it without LED and without fans, its price is about 150 euros.