Easily provided by USB C, compared to traditional types A, B, Mini USB and micro USB, for the benefit of the users. Not having to try to fix it when we put the connector in the right position, will always be good in our eyes.
And yet, maybe it's because of him «Novel» among users, there are consideration paying attention to this type of connector.
An incorrect cable may float your app
This is a feature that many users are not familiar with. It's also a common thread issue that, on one side has a USB C connector and on the other, USB A. The problem is that USB C has too much power supply. power
If the cable we are using is not good, it will have internal objections They will avoid any kind of problem with our devices. However, if the cable is cheap and of poor quality, an increase in cable power can damage our connection. It could be a smartphone, tablet, USB motherboard port. Or, though we have the worst luck, our own computer.
Not all USB C connectors are the same
This problem is found in many cases a USB C connector. But this is either possible or not supported by our cable.
In this regard, it should be remembered that most USB C cables on the market, in fact, work as much as USB A. Because they have been upgraded, in particular, to the power supply of devices. However, if we want to use that same thread, for example, take a picture of it's portable
But, on the other hand, first we need to know what it is alternatives It supports USB C for our device. It probably supports HDMI or MHL as alternatives. Or DisplayPort. Or Thunderbolt 3. That is, it is the user's job to make sure that the connection they want to make is supported, through the data cable and the device connector.
Not all dongles are able to do their job well
This problem mainly affects laptop users with only one or two USB C ports chassis
However, we may be connecting most of the endpoints full bandwidth which found a hole in our laptop. Especially if this is USB 3.0 or 3.1. If we connect, for example, the Gigabit network card, which has a pendrive and we try to extract the video signal from the second wave, we may have to fill the port in question. So, we have to be very careful about what we connect to the dongle. To avoid encountering situations where our computers cannot do what they can.
