TP PF1, ToughRAM, Floe RC360 and AH T600

AIO

Thermaltake Floe RC ARGB

He Thermaltake Floe RC ARGB It is an Aio cooling system, capable of simultaneously cooling both processors and RAM modules of our PC. To perform this last task, Floe uses two water blocks special. One of them forces the processor. For another, it is responsible for cooling the RAM.

Like radiator

There will be two types: one with three 120mm fans (RC 360), or one with two 120mm fans (RC 240). In both genres, fans will have ARGB light. Which can be controlled by the motherboard or by the attached controls on the AIO kit itself.

Boxes

AH T600

The computer case of the future Thermaltake AH T600 it's a new model Open Frame The inspiration that the company has followed is obviously a military thing. Internally we can install motherboards, from the mini ITX format to the standard ATX format among users. There will also be space for two 3.5-inch driving bays. Combine the other two 2.5-inch units.

Because refrigerator, The box will allow radiators up to 480 mm to be placed in front of it. And another 360 mm in its upper part.

Viewing 51 glass

This colored Thermaltake box will be produced in white (as in the previous photo) or in black. At its front part there will be two climbs followers 200 mm, with ARGB light. The I / O box is located on the right side, in the vertical position. It also allows the insertion of graphics cards in the correct location.

The box is inside full tower format. And the left side of the box is made up of small air openings. For storage, the box will have two 2-inch bays and two 2.5-inch bays.

RAM memory

Thermaltake TOUGHRAM DDR4-4400

Another new CES 2020 release has been the new RAM TOUGHRAM DDR4-4400. This RAM does not have the standard RGB light that is usually DIMMs for this manufacturer. And it comes to eliminate the memory ecosystem that the manufacturer has for all its customers. The DIMM

they will, as expected, comply with the Intel XMP 2.0 technology. For the memory configuration on the motherboard is very easy to do.

Energy supplies

Toughpower PF1

This is a version other than RGB that illuminates its Toughpower PF1 ARGB model. This model was introduced last year by the brand. Width of power the available ones are the same: from 650 W to 850 W. And it will continue to maintain the same form factor (140 mm) of the model already in the market. Always high efficiency 80 PlUS Platinum.

T Hardpower GF2 ARGB

This source model will be able to work well with 80 PLUS Gold. Yours ARGB Lights can be synchronized with our motherboard. It will also have very low noise (less than 30 mV) at its power stations. As well as a strong (2%) regulation power will range from 650 W to 850 W