The Riogok Shrine can be found in it The Legend of Zelda: Tears of the Kingdom‘S Hyrule field Region.
We will take you to the Riogok Shrine and solve its “power transmission“Puzzle, which is pretty tricky. In this guide you will learn how to collect and get treasure chests as well light of blessing for the completion of the shrine.
When you’re done, you can refer to other things to do on our shrine locations page or on the Hyrule Interactive Map.
Location of Riogok Shrine
The Rigok Shrine and its “power transmissionThe puzzle is in Hyrule field In the (-1443, -1616, 0089) coordinates.
Riogok Shrine Walkthrough
The power transmission jigsaw puzzles inside revolt shrine is about using objects in your environment creatively. In this case, we are talking about logs: they are used to start and stop machines and to reach objects on high ledges Ultrahand
1. Go straight into the first chamber of the Riogok Shrine. You will see a gate blocking your way to the next. It can be opened with a gear but lacks a gap that prevents it from opening. Pick up the log on the right and use it Ultrahand
2. The gate will open once you hit the small upright statue on the right near the big gear. Proceed to the next room. There you will find a gate on the right side of the room; It is operated via a device that lacks a lever. Take the new log that is currently in the chamber and attach it to the lever.
3. Use Ultrahand to maneuver the log to the opposite side of the device, opening the gate. There is another log in there.
4. The Riogok Shrine Breast is on the ledge your lever is now pointing to. Remove the log that is your lever and combine it with the log from the chamber you just opened. Basically, you should have a really long log.
5. Use Ultrahand to move the really big log to the chest and then attach it to the chest as follows:
6. The weight of the log should pull the chest down. If not, try repositioning the log. Once it’s down, open the chest. you get one powerful construct bow.
7. Now to exit this room, separate the logs and bring one to the platform on the left side of the room. Attach it to the edge closest to the large cog. This will raise the platform when the extended edge of the gear hits the log.
8. You must also use the extended tooth edge to move onto the now moving platform, like so:
9. Once on this platform you will see that there is a short log vertically below the smaller platform above. Move the log so it no longer hits the smaller platform.
10. Walk or jump onto the smaller platform when the larger one you are standing on meets the small one now accessible through the shifted log.
11. Once on the smaller platform, move the vertical trunk back to its original place. The small platform should now be driven to the exit chamber.
12. Examine the seal to exit the shrine and get this light of blessing.