How to activate or deactivate your iPhone correctly: steps, tips and solutions

How to correctly turn your iPhone or turn off? Do not worry, it is more common than it seems, in particular with the number of models and updates that exist. From the iPhone button with the house to the most recent without front buttons, the steps vary and can generate confusion even to experienced users.

In this exhaustive guide, I explain all the current activation forms and deactivate your iPhone, whatever the model you have, in addition to several solutions for the time the device is blocked or the screen does not respond. If you've already seen in difficulty with a forced restart or if you have sought to turn off your mobile parameters or from the control center, here are all the well -explained methods in close and simple language.

How to turn your iPhone correctly

To start using your iPhone from zero or if it has been completely off, it is the first essential step. The process is very simple, but there are small differences between the models, so we will examine them all.

Recent recent models (iPhone X, without home button)

• Press and keep the right side button For a few seconds.
• When you see the Apple logo on the screenRelease the button. The phone will start the system and will be ready to use in seconds.

Light models with home button (at the iPhone 8 and SE)

• Press and keep the side button Until the Apple logo appears.

Important: If you have to enter the PIN code to unlock the SIM after turning it on, enter it carefully. If you fail three times, you will need the PUK code, which can only provide you with the operating company.

If that is not clear to you, we tell you more in this article on how to activate and configure your iPhone.

How to turn off your iPhone according to the model

The deactivation of the iPhone may seem simple, but depending on the model and the version of iOS, there are several methods, some of them little known. Here are all the procedures updated for 2024.

Turn off recent iPhones (iPhone X and posterior, without home button)

• Usual method with buttons:
  1. Press and keep the side button and one of the volume buttons (up or bottom).
  2. When the “sliding to extinguish” cursor appears, move it from left to right.
  3. In about 30 seconds, the device will take place completely.
• Alternative method:
  1. Press and release the volume up button.
  2. Press and release the Down volume button.
  3. Press the side button until the rotation control or the Apple logo comes out.

Ojo: If you maintain this combination of too long and not loose buttons when the menu appears, you can involuntarily call emergency services. It is essential to go out as soon as the screen deactivation option appears.

Turn off iPhones with the Home button (iPhone 8, 7, 6 and SE)

• Press and hold the right side button until the sliding command “slide to turn off”.
• Put your finger from left to right on the control and wait for the mobile to go out.

Turn off the iPhone from the settings (valid for any model and useful if the buttons do not work)

• Access Adjustments> General> Delete.
• You will see the sliding command “slide to deactivate”. Do it and go.

Extinguish from the control center (iOS 18)

Apple added access to the control center in iOS 18 that many users still do not know.

• On iPhones without home button: slide down the upper right corner to open the control center.
• In ancient iPhones: Slide the top of the lower central part.
• Search and continue in a hurry The stop icon Top right, then slide to go out.

Accessibility methods: Assitivouch

If you have physical problems with the buttons or if you do not want to use them for any reason, you can go to Asiditouch.

1. And a Adjustments> Accessibilidad> Play> Asidevetouch and act.
2. A Floating virtual button On the screen. You can customize your menu to add the “SOS” function.
3. From there, you can deploy the menu which includes the option of “slide to extinguish”.

How to turn on the iPhone after having turned it off

• Press and keep the lateral button (or higher in the old models) for a few seconds Until the Apple logo appears.

After lighting, you will need to unlock the SIM with your PIN code, if you have a configured.

Siri, voice commands and additional options

With advances in iOS, you can use Siri to ask him to turn off the iPhone. Just invoke Siri (with the button or “Hey, Siri”) and say: “Turn off the iPhone”. Sliding control will be displayed to deactivate that you can agree to play on the screen or confirm by voice.

Force the restart or out of the iPhone when it does not answer

On some occasions, the iPhone can be completely blocked and does not respond to the buttons or the screen. In this case, what you need to do is a forced restart (which deactivates and restarting the terminal), although there is currently no method to deactivate it completely without restarting in the process.

Forced restart on iPhones without home button (iPhone X and higher)

1. Press the volume button quickly.
2. Click and quickly release the Down Volume button.
3. Keep the side button Until you saw the Apple logo.

Forced restart in old models with home button

• On the iPhone 7 and 7 Plus: Keep the side button and the Down volume button for 10 seconds, until the apple appears.
• On the iPhone 6S, 6, SE (1st gene) and previous: Keep the home button simultaneously and the upper or lateral button until you see the Apple logo.

Important! This method does not turn off the iPhone, but restart it. There is no combination of buttons in recent models) that completely turn off the device without using the screen.
If you have to turn it off without touching the screen because it is unusable, the only option is to let the battery run out.

Options when the screen is blocked or does not answer

Restart the iPhone without screen with iTunes or fix

1. Connect your iPhone to the computer using a cable.
2. Open iTunes (Windows MacOS antiguos) o Researcher (MacOS 10.15).
3. Select your device and click “Update” the system (this does not delete your data).

Restore system settings (if you get the screen on)

• When the iPhone responds again: go to Adjustments> General> Transfer or restore the iPhone> RESTABO> RESTAB.
• This does not eliminate personal data, but returns adjustments such as the network and confidentiality to its original state.

Factory restoration without backup (extreme measure)

1. Connect the iPhone to the computer and place it in recovery mode: quickly press the volume, then lower the volume and keep the side button until you see the recovery screen.
2. On the computer, select “Restore”. It is advisable to configure the device as new to exclude errors inherited from the old backups.

What if the problem persists

• If the iPhone still does not respond, it may be due to a serious hardware failure, especially on the screen. In this case, it is best to go to a specialized technical service.
• Some stores and technical services offer free diagnosis and express repair on the screen, with quality and warranty spare parts.
• In the event that the repair is not economically viable, you can consider the option of a reconditioned iPhone.

Frequent questions and warnings on deactivation and ignition of the iPhone

• It is not advisable to exhaust the battery To turn off the iPhone, as this procedure can damage the battery prematurely if it is done frequently.
• In an emergencyStay calm and follow the forced restart steps that best suit your model.
• Apple offers official support for ignition or block problems via its website and customer service line, where you can also get the PUK code if you are blocking SIM by mistake.

Managing the ignition correctly and out of your iPhone allows you to extend your useful lifespan and optimize your performance. The mastery of these methods gives you the safety and the ability to resolve most usual failures without having to go to technical assistance, although it is always advisable to be attentive to the updates and new products that Apple can incorporate in each version of iOS. We hope you have learned to activate or deactivate your iPhone correctly.