Some people in Europe have the problem that even if they pay for a certain WiFi connection speed at home, they cannot enjoy it on their devices. This can be caused by several factors that weaken the signal and make it not strong enough, but, fortunately, it is something that usually has a solution.
It’s possible to make technical adjustments to the router to extend its signal range, but sometimes you just need to keep a few things in mind when connecting your devices. Actually, The saturation of your network may largely depend on this.
Certain actions, such as placing metal objects near the router or misdirecting its antennas, if exposed, can significantly deteriorate signal quality and prevent you from taking full advantage of the speed you pay for monthly.
Two networks available
Current routers They use two different frequency bands and they have different advantages. This means that, depending on the devices, it is better to connect them to one or the other. On the one hand, 2.4 GHz, which is the most basic, is the one to which it will be necessary to connect the oldest devices – since they are not compatible with the other – and home automation or devices that do not require no broadband. This network has a larger coverage radius, but it also has more interference and is a bit slower.
On the other hand, the 5 GHz network is the one in which, with the same name as the previous one, it has that same number or the “Plus” badge, indicating that it is the network with the best speed, more precisely, it is able to offer a maximum speed up to 1300 Mbps. Its signal reaches a shorter radius, but presents less interference, although it must be said that it is not compatible with older devices.
By connecting less bandwidth-intensive devices, such as household appliances, to 2.4 GHz, the other network will be freed up so that its higher bandwidth can be allocated to devices that may need it, such as televisions, computers , Cellphones. phones or tablets. Of course, if the device you want to connect is far from the router, there may be no choice but to resort to the 2.4 GHz network,
No bands on router
The location in which the router is placed is essential for the signal to reach as far and as strong as possible. Objects around it can make it work worse, so be careful not to put it in a bad position. The first thing to keep in mind is that objects such as furniture, books or even sculptures can both absorb and reflect signal waves, which can reduce their intensity.
This intensifies the larger and denser the object. Metallic objects, on the other hand, can interfere with this signal, causing a drop in speed or even causing some devices to be connected momentarily, so it is also not practical to have one next to the router. If, for example, you want a TV to have a better connection, ideally there should not be too many metal objects between it and the router.
It is therefore preferable that the device is not surrounded by objects on a table, or at least not placed right next to it, so that they cannot alter the signal. It is inevitable that some objects may interfere with the signal, although in many cases these can be removed and placed elsewhere.
Fewer connected devices
One of the differences between the 2.4 GHz network and the 5 GHz network is that the former has less bandwidth and the more devices connected, the lower its speed. It is therefore convenient to connect home automation devices to it and not computers and televisions.
Exactly the same thing happens in the 5 GHz network, with the only difference that the bandwidth is greater than in the other. Therefore, when it is important to prioritize one device, it is advisable to disconnect others that are not essential.
This type of tape has up to 24 non-overlapping channels, so, a priori, this should not be a problem, but, in general, it is something that usually works when it comes to increase connection speed in downloading or streaming situations.
This may interest you
Table of Contents