How to Know Your MacBook’s Exact Hours of Use and Remaining Battery Life

All batteries deteriorate over time. iPhones or Macbooks can lose 15% of their charging capacity after the first two years, but this is only an estimate: knowing and getting the most out of the cycles and mastering the charging times will help you minimize this deterioration.

With a few best practices, you’ll ensure your gear maintains good battery health for longer. In this article we tell you where to check the status of the battery and how to know if everything is in order or if you need to start thinking about changing it.

How to Know Your Macbook’s Charging Times and Patterns

First, let’s check where you can see the battery status of your equipment:

1. Come in ‘System Parameters‘ from your Macbook.
2. Now go to section ‘Battery‘. Here you will see the ‘battery health’, in addition to other aspects, such as a diagram of the last charges -with the symbol of a lightning bolt, in green-, you will see which applications are the most energy-demanding and you can Choose between three different energy expenditure options: low consumption, automatic or high consumption.

To improve charging habits, it is essential not to abuse the charger: the habit of keeping equipment always connected deteriorates the system, that is for sure. But if we do it, it is essential to activate the option ‘Optimized battery charging‘, in the section ‘battery health‘. This feature “learns from your daily charging habits to fill it up to 80% and complete the charge before disconnecting it from the mains”. An option, in short, that avoids the stress of constantly receiving tension.

In this diagram, you will see the hours of power consumption, the hours the equipment was charged or the screen time every hour during the last 24 hour cycle, in addition to having access to the panel of use of the last 10 days – power consumption and screen usage, excluding sleep mode.

How to Know Your MacBook Battery Cycles

Now let’s take a look at how your Macbook’s battery is doing on a deeper level. As indicated by Apple, here is the route to follow:

1. Click the Apple icon in the upper left corner
2. Now choose the option ‘System Parameters‘
3. Now choose the “General” option and scroll down, where it says “system report‘. You can also open this option directly by searching for it in Spotlight or from the ‘utilities‘.
4. A new window will open. Choose the section ‘Material‘.
5. In this section, look for the section ‘Feed‘. Please note that this section is only available for portable systems, any Macbook Air or Pro, but not iMac or Mac Studio.
6. In this section, you will be able to consult several very relevant figures, such as the number of cycles, battery status and maximum capacityin addition to checking the state of the charge or the serial number, capital to inform in case of need of repair or change according to the guarantee.

These cycles determine when the battery will begin to fail. Indeed, to have an estimate of the useful life of the battery of your Macbook, you will only have to know the number of cycles of this one.

This, yes, each complete cycle is counted from a point of discharge below 20% and load above 80%. And to verify that the system is charging properly, you need to look not only at the official cable charging light, but also at the battery icon, which will change to show a lightning bolt crossing the battery symbol.

How many charge cycles does a MacBook Pro have?

It depends on the model though. the vast majority of Macbook Pros and Macbook Airs can comfortably achieve 1,000 charge cycles at 100%. This equates to at least three years of recurring use. From there, the load capacity will gradually decrease. Luckily, Ventura’s charging process is so optimized that you probably won’t see your Mac laptop’s battery affected for the first six years of use.

In Applesphere | Everything you need to know before changing your iPhone battery