How to load the pencil in the apple step by step

The Apple Crayer device is already part of a better experience for many iPad users. This brand improvement allows us to do an excellent work of writing and drawing, but like all electronic devices, it must also be recharged. In this article, we leave you a guide with the steps you must follow and with it, we will solve your question on “How to load the Apple Step by step pencil?”

Identify your Apple pencil model

There are two versions on the market And that is why you should first know which model is yours before loading it. The first generation model has a fluid design and a socket that can be deleted. The second generation is more stylized and adheres magnetically to the side of the iPad for the load.

By the way, in case you have doubts and you came here, we have this other article on what Apple Crayer is compatible with my iPad? In addition, if you use the search engine, you will find offers, guides and other items related to Apple pencil and its uses or purchases.

How to load the first generation Apple pencil

Now that you know which model or generation is your Apple pencil, we can move on to the stage stage of each generations, although I must say that it is almost always the same in terms of mechanics. After that, you will know how to load the Apple step by step? Let's go with step by step:

1. Remove the rear file: You must first remove the cap on top of the pencil, the same which covers the Lightning connector; Key for loading.
2. Connect it to the iPad: insert the connector into the lightning slit of the tablet and make sure it is well connected. Then a message will appear on the screen indicating that the Apple pencil is loaded.
3. Check the load level: It is already connected to the iPad; You can now check the load level at the top right of the screen at the control center. Depending on the model you have, for example, without starting button, slides in the upper right corner. Instead, if you have the start button, slide up and down. You can also add the battery widget to the home screen for faster access to the load level information.
4. Loading time: The first generation Apple pencil is quickly loaded; You can usually get up to 30 minutes of use with only five minutes of load and reach the full load in about 15-30 minutes.
5. Place it and put the cap back: Once you are completely busy, disconnect it from the tablet and place the cap again to protect the Lightning connector.

How to load the second generation Apple pencil

To continue with this practical guide on “How to load the Apple Step by step pencil?” How to load in case you have the second generation pencil::

1. First locate the load area: Unlike the first, this type of pencil is loaded by magnetic induction, because it does not use a lightning connector. Before starting the load, make sure that the iPad is compatible with this Apple Crayer model and locates the loading area on the side of the device.
2. Place the apple pencil: You just have to place it in the designated area for the load, ensuring that it adheres safely through the magnets it has incorporated.
3. Check the load: When they spent a few seconds, it checks that the loading process has started. You will see that a load icon appears on the same screen confirming that it is loaded properly. As with the previous model, you can check this step at the control center.
4. Loading time: The second generation Apple pencil is also quickly loaded. It can reach a full load in about 15-20 minutes, allowing you to enjoy an prolonged user experience. As with the previous model, you will get a considerable duration with only a few minutes of load.
5. Descending: If you no longer want to continue using the pencil, simply take it from the iPad side; You will have nothing else to start its use.

Battery maintenance advice

All batteries of electronic devices have their longevity depending on how you use them and how you treat them, as well as how the recharges. To make sure you do it well, you should consider these recommendations that we indicate below and in this way, you will know that the battery will last as long as possible:

• Always keep the load between 20% and 80%. Like other devices that use the battery, it is important to prevent it from unloading, as well as leaving it in charge all the time.
• Avoid high temperatures and victims because they can negatively affect the battery. Try to keep the Apple pencil in an environment at temperate temperature.
• See software updates when the iPad asks you Because in this way you will optimize the pencil performance; Updates often include compatibility and performance improvements.

In the final conclusion on “How to load the Apple Step Party pencil?”, Have you ever seen that the load function is a simple process, which varies subtly between the only two models that exist. When you follow these simple steps, you make sure that your device is always ready for use, improving its productivity and creativity. Do not forget to follow the battery maintenance tips To extend the useful lifespan of Apple Crayer and take advantage of an optimal experience. We hope that this current article on the iPhone on how to load the Apple Pas Pas Penon? It was help and now you have no doubts about it. As we promised, it was easy and simple and as you can see, very similar in different generations. Any questions or advice you know can be left to develop the article. See you in the next one!