How to restart your Apple Watch safely: Complete Guide

¿How to restart your Apple Watch safely? Retracting an Apple Watch safely is a little more frequent than it seems. Whether you want to sell it, give it to someone or simply solve a technical failure, know how to make it guarantee that you do not lose your data and that the clock is working properly when you configure it again. Although it may seem a complicated process, the reality is that it is much simpler than you imagine if you know what way of following.

In this article, we will guide you step by step for the different forms of restart that you can apply to your Apple Watch, as the case may be. From a simple restoration of the device, to its result if you do not have the iPhone by hand or even if you have forgotten the unlock code. Everything clearly explained, with useful advice and taking into account models with GPS + Cellular. Take note because it will come from pearls to leave your clock like new.

When should my Apple Watch restart?

Restarting Apple Watch is not something you should do lightly. In fact, there are many types of restart and everyone has their function. Before you start, it is important to know what you are looking for:

• Restore the factory: Absolutely everything is erased, as if you had finished leaving it from the box. Ideal if you are going to sell or give.
• Restart by blocking: When the clock is captured, forced restart is the fastest solution.
• Disturate iPhone: necessary if you no longer use the clock with this phone.
• Reset by forgetting the code: If you don't remember how to unlock it, there is a special procedure to zero it.

Restart the Apple Watch from the iPhone

The most common way to restore Apple Watch is to do it with the iPhone with which it is matched. This method eliminates the entire content of the clockIrrection of your Apple account and you can create a backup before deleting it.

The steps are as follows:

1. Keep the Apple watch near the iPhone throughout the process.
2. Open the Watch application on the iPhone.
3. Go to the “My Watch” tab and touch “all the watches.
4. Press the information button (i) next to the clock you want to delete.
5. Select “Destructive Apple Watch”.
6. Confirms play “UNCRAVE”.

At that time, you will wonder your Apple ID password. This is essential to deactivate the activation block (if you do not, cannot be configured later). In case you have a model with GPS + Cellular, You will wonder if you want to keep or delete your mobile plan::

• Keep the plan if you will connect it again with the same iPhone.
• Delete it if you sell or give the clock. You may also have to contact your operator to cancel the rate.

Before deleting it, the iPhone will automatically create a clock backup, in case you want to restore it as is. At the end of the process, the clock will display the message “Start the link”. He will already be ready to configure from zero.

How to restore the Apple Watch from the clock itself

If you don't have the iPhone by hand, You can also restart the Apple Watch from the device itself. The procedure is quite intuitive:

1. Open the Apple Watch adjustment application.
2. Go to “General” and enter “Restore”.
3. Touch “Delete content and adjustments”.

The clock password will ask you. In the event that it is a GPS +cellular model, you will also have to decide if you maintain or eliminate the mobile plan. Once you have confirmed “erase everything”, Apple Watch will be restored to factory values.

What if you forgot the unlock code?

One of the most common reasons why someone wants to restart an Apple Watch is that he has forgotten the code. Fortunately, Apple allows you to delete and restore the device directly from the clock Even if you don't remember the code, yes, you must have it in the charger throughout the process.

Follow these steps:

1. Place the Apple Watch on your charger.
2. Press the side button until the update button appears on the right.
3. Press the digital crown for the force or hold it until you see the “Delete content and adjustment” option.
4. “Restore” key and confirms.

When you finish, you can configure it like new. If you have a previous backup, You can restore it during the configuration process.

The clock is blocked with the Apple logo

Another scenario is when Apple Watch is blocked by only displaying the Apple logo. If that happens to you, You can try a forced restart::

Press the lateral button and the digital crown at the same time until the screen is turned off and reappear the logo. Then release the pimples. It can take a few minutes to turn on.

If you are still stuck, you will have to untangle it and the alphabet from the iPhone:

1. Open the Watch application on the iPhone.
2. Go to “My Watch”> “All watches”.
3. He plays the (i) of the clock in question and chooses to “collapse”.
4. Enter the Apple password to delete the activation block.
5. Once unleashed, click “Start the link” to configure it again.

This procedure will also allow you to restore it from a backup If you have it.

Other recommendations before restarting your Apple Watch

The rest of your Apple Watch may seem a simple action, but there is a series of recommended precautions which must be taken into account before doing so:

• Make sure you have enough battery. Ideally, you have more than 50% or are connected to the charger.
• Make a backup of the iPhone If you want to keep your data.
• Eliminate your transport cards If you use them with the portfolio application.
• Do not insert objects in the Apple Watch holes. There is no physical restart button and you could damage it.
• Update iOS and Watchos Before restoring if possible, to ensure maximum compatibility when configuring again.

It is also a good idea to check in the “research” application that the clock is no longer linked to your account. To do this:

1. Open the “Research” application.
2. Find your Apple Watch among the associated devices.
3. If it appears, select “Delete the device” then “Continue”.

This Eliminate any link between your identifier and your clockIdeal if you are going to give it or sell. Keep in mind that in today iPhone, we have hundreds of tutorials on Apple Watch, an example is how to adjust the brightness and size of the letters of your Apple Watch.

After these steps, you can be calm: you will leave your Apple Watch as new, without personal data, without activation block and ready for a new life, whether with you or with another person. In addition, you can solve any technical problem that could affect its operation. We hope you know what your Apple Watch is restarting safely. Go to the following article.