The electric car revolution is increasingly present in Europe. According to the most recent reports, its sales will increase by 22% in 2025 and skyrocket by 60% in 2026. Manufacturers are working to improve aspects as fundamental as enginesincreasingly lighter, more compact and more powerful, to the point of integrating them into the wheels, or batteries like the one which promises a range of 300 km with a five-minute charge.
Due to the special architecture and operation of purely electric cars compared to cars with combustion engines, companies in the sector are also working to improve key components such as brakes. The last to present his progress was Mercedes-Benz and its R&D center in Sindelfingen (Germany), where its engineers are working on the development of a braking system by caror what amounts to the same thing, integrated into the electric drive unit that contains the engine, transmission and differential.
Unlike external brakes connected to the wheel hubs, as the vast majority of current cars have, this Mercedes innovation involves almost completely eliminates the need for maintenance throughout the life of the vehicle. In addition to the savings this represents, the new layout also reduces unsprung weight (that which corresponds to the wheels, damping… everything that is not integrated into the chassis), which drastically improves handling.
How it works
There are many different braking systems, but the most common in modern cars are disc brakes. When you step on the brake pedal, hydraulic pressure is created in the master cylinder or brake master cylinder, a part located in the engine compartment. This drives the brake fluid through a series of pipes to the pistons in each wheel hub. These hydraulically operated pistons force the brake pads against a rotor to create friction and make the wheels spin more slowly.
Instead, the primary method of braking for electric vehicles is the motor itself. When the speed is reduced, thanks to the regeneration system, wear of the brake pads is not only avoided, but also This energy is used to provide electricity to the battery and increase their autonomy.
The braking system integrated into the Mercedes engine
With the new system proposed by Mercedes, which is part of its “Pioneering Innovations for the Car of the Future” program, the German company offers a complete overhaul of the braking system. Instead of their usual location inside the wheels, the brakes are integrated into the electric drive unit of the front or rear axle.
To prevent it from reaching too high temperatures, the disc is water cooled and does not rotate, which reduces wear. At his side stands the brake pad, which is circular and rotates with the motor. “The braking effect is easy to control and does not fade even under heavy loads,” note the German engineers.
Omicron
Some of the great advantages of this method are that it takes up very little space, the discs experience minimal wear and do not rust, so they “require virtually no maintenance.” In addition to making them More durable and reliable than conventional brakesAt Mercedes, we have also thought about reducing pollution, with compartments designed to collect dust resulting from friction which does not need to be emptied.
Other advantages are linked to a better aerodynamic performance of the vehiclethanks to freedom when designing the wheels. This opens up the possibility of covering them completely, which reduces the resistance coefficient and can lead to a considerable increase in autonomy. Additionally, the braking noise and rust that usually appear when the car is not used regularly would also be minimized.
Other pioneering innovations
In addition to this new braking system integrated into the powertrain, Mercedes took the opportunity to present other “pioneering innovations for the car of the future”. many of them aim to reduce CO2 emissions and to use more sustainable and 100% biodegradable materials.
The interiors of the next models from the German house, which will celebrate the 100th anniversary of its foundation in 2026, will benefit from biotechnology to produce a synthetic thread similar to silk. Engineers are also working on a realistic alternative to leather, made from recycled plastic and bio-based materials. The resulting material is breathable, waterproof and lighter than real leather.
The photovoltaic surface for the electric cars of the future
Omicron
Among the most promising advances were also presented a new type of high-efficiency solar modules (20%) and only 5 micrometers thick, thinner than a human hair. Weighing 50 grams per square meter, this new photovoltaic “paint” could be applied to the exterior of the car body and generate enough solar energy to travel 12,000 km per year (still in ideal conditions).
Finally, among the components that Mercedes technicians work on in the laboratory, programmable microconverters stand out, standardized parts that are easy to update and can integrate various power electronic functions directly into the car battery. This would open up new ways to configure the electric vehicle space and opt for increasingly bold and revolutionary designs.




