As you know, the iPhone uses the Lightning port for charging, plug in headphones (at least from iPhone 7) and even adapt other accessories. Be a so useful and multifunctional tool, it is important that it works as well as possible.
But what happens when you stop working the way you should? Although the first thought that comes to my mind is that your iPhone has been damaged, the solution might be easier than you think.
Therefore, we tell you some possible solutions and its step by step, so you can apply them if at any time you present problems with the iPhone’s Lightning connector. So, without further ado, let’s get started.
IPhone Lightning Connector Problems: Here Are Possible Solutions
the Lightning connector on your iPhone It can fail for a variety of reasons, from dirt to moisture. Either way, we’ve shown you some of the most common solutions to these issues.
Restart the iPhone
Probably the failure of lightning port of you iPhone This is due to a software issue that is preventing it from working properly. This is why one of the the best solutions that you can apply is to restart your device. In most cases, this is sufficient to resolve this problem.
Use another USB cable
If at restart your device You notice that the problem persists, it is possible that the fault is not present in the material but in the accessories. So try try another cable or charger.
In these cases, it is recommended use official Apple accessories or one of several brands authorized by the manufacturer, as in many cases the use of these unauthorized accessories can be the cause of the problem.
Clean your iPhone’s Lightning port
Typically, we carry the iPhone in our pocket or bag, which usually causes the Lightning port to fill up with dirt, dust, and other debris that prevents it from working properly.
For this reason, it is important that you clean the Lightning port to remove any agent which changes its operation. Then we tell you how to do it simply and safely.
In order to clean the iPhone’s Lightning port, you will need: a flashlight to ensure good lighting, toothpicks preferably made of wood or plastic and cotton to put it on the tip and clean it more easily and effectively.
- The first thing you need to do is turn off your iPhone.
- Place the toothpick on the cotton and rotate it by pressing lightly on it so that it wraps around the tip.
- With caution, insert the toothpick with the cotton tip in the puerto lightning and start to gently scrape the entire area to remove dirt.
- Repeat this step as many times as you feel necessary until you notice that there is no residue left.
Update your iPhone
Continuing with the solutions at the software level, it is likely that your iPhone does not have the latest version of the operating system installed.
In any case, updating your equipment ensures that any connection you make through this port is compatible with the current version of your mobile
Your iPhone’s Lightning connector may be wet
When it was detected water in lightning connectorIt is very important not to connect the iPhone to any accessories, let alone charge it. In these cases, the mobile will show you an alert indicating that “Unable to reload” O “Liquid detected in the Lightning connector”.
What happens when the Lightning connector gets wet?
When he iphone lightning connector is wet, the pins on the port corrode, causing permanent damage or connectivity issues on the iPhone or accessory.
How to dry the Lightning port?
If this happens to you, what you should do is give gently small bumps on the top of the mobile with the lightning port facing down to allow excess liquid to escape.
Then let it air dry for at least 30 minutes and try to connect it again. If the alert persists, leave it in a dry, dark place for at least 24 hours before trying again.
Now that you know some of the possible solutions if the iPhone’s Lightning port It doesn’t work properly anymore, you are ready to fix it or if you go through this situation in the future.
Table of Contents
