After the equator of 2020, Realme introduced the Realme Watch, your smartwatch at a great price. As GSMarena reports, the specs and design of the second generation Realme Watch have just been almost completely filtered out, after it went through the FCC.
This Realme Watch 2 would again bet on a rectangular design, in addition to TFT technology on its panel, noting that it will be a fairly inexpensive proposition. So let’s review the Leaked specifications and features of this Realme Watch 2
TFT panel and rectangular design, a familiar formula
The Realme Watch 2, according to information disclosed by the FCC, will have a 1.4-inch panel with a resolution of 320×320 and TFT technology. According to the figures, it will be an identical panel compared to the previous generation
The battery of this watch will be 305mAh, almost double that of the previous model, which had 160mAh. The Realme Watch gave us a week of use, or even two if we didn’t press too hard. With an extra 145mAh, it shouldn’t be hard to cram through the month of use, as long as the load on sensors or OS isn’t much higher.
The design will be similar to the previous model, although the dimensions will vary slightly with the Realme Watch 2 being a bit larger.
Regarding its design, the filtered image reveals that it will be rectangular, and FCC information indicates that it will have measurements of 257.6 x 35.7 x 12.2mm, slightly larger than the previous model. It will connect via Bluetooth 5.0 BLE and, while there is no date for its official presentation yet, it shouldn’t be too far away.
Via | GSMarena
