News wise Best Marvel Rivals Controller Settings: How to Properly Configure My Controller for Excellent Aiming?
As with any competitive game, good settings can make all the difference in Marvel Rivals. In this article we'll focus specifically on console gamers, although we'll inevitably find PC gamers looking for the best controller settings too.
Properly adjust your sensitivity in Marvel Rivals
The first attitude that will be important to us here at Marvel Rivals is sensitivity. This is a setting that we consider personal and we won't give you an exact value, which ultimately wouldn't make much sense. The best advice is to play with a value that you feel comfortable with above all else.
Please note that the lower the sensitivity in this area, the better it is for you. It can be a bit complicated at the beginning, but with a little practice you will noticeably gain in precision. Generally, professional shooting players opt for relatively low sensitivity to remain precise.
Therefore, Take a look at the values that we will give you below as a basis From there you can find the settings that make you feel most comfortable in the game.
- Horizontal sensitivity: 140
- Vertical sensitivity: 100
Check out our Marvel Rivals controller settings
The other important decision you need to make about your controller is the sensitivity curve. Two schools collide: either you can choose a linear curve, which allows the increase in target sensitivity to be kept constant, or an exponential curve, which allows a small increase at the beginning, then a very fast one as you move the stick further away.
Again, this is specific to each player and we are not going to tell you to choose this or that setting blindly. Try both and just see with which you have the highest precision and the best feeling, Then choose the latter!
Another important adjustment: that of the Aim Assist performance. Basically don't bother and set the value to 100. Some players may find that unwanted targets are “captured” a little too often when it reaches its maximum. In this case lower it slightly.
Set it to 90 or even 80, but avoid going too low to avoid losing the benefits. For the rest of the settings, we'll let you take a look below at where we've entered the values that we think are best for Marvel Rivals controller players.
- Minimum dead zone input: 1
- Maximum deadband input: 1
- Increased maximum dead zone sensitivity: 4
- Maximum horizontal deadband response time: 30
- Swap left and right joystick: No
- Reverse horizontal axis: No
- Flip vertical axis: No
- Aim assist window size: 40
- Hero Projectiles Aim Assist Sensitivity: 100
- Heroes equipped with instant strike weapons – Aim Assist Sensitivity: 100
- Melee Hero – Aim Assist Sensitivity: 0
- Deactivation of aim assist in the maximum dead zone: No
