This project is fantastic for those who have neighbors who think they live alone in the middle of the countryside, without neighbors around them. Other projects, such as the one we are talking about below, are perfect for all houses, because it is an article that we can find any house and which is very useful on an up-to-date day base.
We are talking about the roller of cooking paper. In addition, a roll of cooking paper and a raspberry pi have nothing in common. But what happens if we meet? The result is a electric paper dispenser which works through vocal controls.
Voice controlled kitchen paper dispensor
On the market, we can find devices that incorporate a sensor That, al detect movementThey turn to offer a paper sheet, however, its operation is not always the best. In addition, if we place it in a position where we usually spend, the device can spend the day by extracting paper without really being necessary.
This seems to be the same idea as the 3MEGABYTEOFHTRAM user, a user who has created a distributor of kitchen sheet devices that works with Raspberry Pi.
The command that any user who wishes to implement this design must use is distribute a towel Although any other can be used. Unlike other projects where the use of a 3D printer is fundamental, to carry out this project, a manual kitchen paper distributor of the Scott was used.
To adapt the Raspberry Pi and everything you need used a 3D printer (We can find the conceptions here). These conceptions are adapted inside this specific distributor model, therefore, if you want to make it in another model, you will have to adapt it, create the completely zero design or find the same distributor.
The raspberry used in this project is the Raspberry Pi 4 with 2 GB of RAM. To move the paper jet, you used a 12V engine with the corresponding controller connected to the Raspberry Pi and a microphone To receive the instructions and put into service.
If you want to know more about this project and the steps you have followed to carry it out, you can visit the section of this user available on the Hackaday website. As we can see, the operation and all that is necessary to do it is very simple, if necessary, if necessary hygienic paper dispenser It works with voice commands, you know how you can do it using a Raspberry Pi.
