Since the launch of the new NVIDIA graphics, the RTX 50, a large number of users have left the most serious being one of the most serious connectors between the power supply and the graph. NOW Corsair assured that his Psu They have cables They are designed to avoid these failures even if they seem defective.
The cables that connect a power supply with the different components of a PC tend to pass many exhaustive tests to ensure that they have no problem. A failure during the transmission of the source energy to the motherboard or another component such as the graphics card could completely break the component. This is why brands like Corsair have a series of implementations designed to prevent it from happening.
All power supply cables do not pose problems with RTX 50
One of the problems that have spoken the most with the arrival of RTX 50 These are the Chess who have caused many ParametersFrom the problems during the watch the image due to the pilots to the situations in which the GPU and the power connector were burned. Software failures can be resolved much simpler because it involves using previous controllers or waiting for them to update them, but in the event that the equipment is physically affected, it is physically a big problem.
For this reason Corsair You must have explained how the cables of your fuente of food Since there are users who have indicated that the models designed for new generation graphics (12V-2 × 6 conector) has a problem that makes it “get” slightly. “In the event that the movement was too large, it would imply that it could be a factory defect which prevents the connector from fixing well, which makes it burn it by not properly transmitting energy, but this is not the case.
And it is that the company has ensured that this slight movement is specially designed to prevent the pins and pins that connect to the break with the use, that is to say that they offer flexibility which protects them during the withdrawal and the installation of the connector. In turn, they assured that the fact that they are loose advantages are power connectors because they can adapt to the small inadequacy that the tension can be relieved.
It really has to do with the length offered by the pins of each pins, there are users who are worried to a large extent that the cables are sold with the shortest pins due to the fact that this would imply that they do not take contact as they should. But in this case, this is not the case, because if an image of the cable connected to a graph is observed, you can see how everyone comes into contact.
In this case, the brand had to go out to give explanations on this subject to prevent a user from confusing this function with the real problems that a cable that moves too much, indicating that if it is too loose, it is necessary to contact the support because it can be really defective.
