As for ventilation options, we have a lot of possibilities. If we want to choose an air dissipator, we can mount any model that is up to 179 mm high. If on the contrary, we bet on the coolant of the liquid, then we can go up:
- At the front: 120/240/280/360 mm.
- At the rear: 120/140 mm.
- In the upper part: 120/240/280/360 mm.
As for the fans space, in this tower, we can go up to a total of 8 fans to generate an optimal air flow. As standard, this model is delivered with 4 140 mm Stratus PWM STRATUS PWM fans with ArcBB, one at the back of the tower and 3 fans at the front.
The tower assembles several anti-plain filters: in the front, the upper and lower part. Inside the tower, we find a total of PCIE extension berries to connect the peripherals we need. And inside, we will have space for a hard drive of 1 3.5 inch (which we can replace with a 2.5 inch), as well as for 6 units of 2.5 inches.
In connectivity, we have a USB-C port, two USB-A ports, a headphone jack, a microphone input, an ignition button and a reset. The tower is high density aluminum, ABS plastic and tempered glass. Its dimensions are 486 × 228 × 472 mm, and its overall weight is 9.7 kilos.
External analysis
The tower is available in a very simple cardboard box, as usual in this type of product. The first thing we are at the front of the box is a world photo of the tower. And, at the rear, a global look at the different parts that make it up.
On the sides of the box, we find a summary of the main specifications of the tower, as well as its most important characteristics.
We open the box and take out the tower. This is protected by two pieces of enlarged polystyrene, which are responsible for protecting it at all times possible during transport. In addition, it arrives inside a plastic bag which protects the rest of the scratch tower and dust.
The tower, as we can see, is black, with a very elegant finish so that the Arguu lighting can be well appreciated at the front of the tower and on the temperate glass side.
The front of the tower is of the metal trellis type, showing at any time the front -end fans of the tower. These fans, as indicated in technical specifications, are 140 mm and have an argb lighting system.
This mesh, in addition to protecting fans, acts as an anti-political filter. And we can extract it very easily to access the fans or clean it from time to time to prevent the interior of the PC from being filled with dirt.
A detail that drew our attention, and we liked it, is that at the top of this network, it seems written, in Braille, the word “endorfy”.
In the upper part of the tower, we find an anti-political network which will be responsible for prevention of dirt in the PC at the same time which protects the elements that we place at the top (for example, the liquid coolant).
We also have the connection panel with the ignition and restart buttons, the status LEDs, the USB ports and the audio plug.
The upper panel can be extracted using a screw to access fans and clean it from dust.
The left side of the tower forms a temperate glass. This is anchored at the chassis at the back of the tower, and allows us to see the entire interior of the PC and access it easily when we have to make an adjustment.
The right side is nothing more than a black sheet which is used to hide the back of the motherboard and all the wiring.
At the rear, we find the typical fan: a 140 mm fan, the hole for the motherboard connection panel, the PCIE slot machines and the hollow supply source. By the way, the PCIE slit screws are hidden and very hand.
Finally, below, we find another large anti-plain filter and 4 legs, with rubber transplant, on which the tower will be sustained. This rubber finish not only helps not to move the PC when we have inn, but also to reduce the vibrations generated by mechanical elements, such as fans.
Internal analysis
We have already seen how the tower is. It's now time to take a look inside. And what better way to start than by the manual and the accessories included.
To access the interior, what we are going to do will be to remove the front (as we have already seen in the previous section), as well as both sides and the upper anti-political filter.
As we see, the interior of the tower is quite wide and has very good pipe options. In addition, the motherboard does not reach the top of the tower, leaving a little space to be able to connect the CPU cables at the top of the tower. At least, in theory, we will see it later.
The fans are mounted as standard so that the three of the front have put air from the outside and the back expels the hot air generated.
In the lower part, we find a fairing, which is used to make food separate and hide from the rest of the PC.
We have two sites to set up liquid cooling. The first would be on the front, having to change the three fans who come to the tower. And the second, and the one we recommend, in the upper part.
At the rear, we find all the wiring which is standard in the tower, which is not small. This is one of the details that we did not like so much, because, although the tower offers many wiring pipe options, the standard is too messy, having to spend time place it better.
In addition, it is delivered with a hub to connect the fans, both to control them by PWM and to control the ARGB lighting from a single motherboard port. A detail and a success.
Finally, let's see the wiring that forms the tower. We have the supply, reset and LED connectors, a cable for USB-A ports, another for USB-C, an HD-Audio connector, a SATA connector to feed the fan center, a PWM to control the fan diet and another argBB for lighting.
Reset, by default, is connected to the RGB lighting center. Why is it very simple and intelligent: the manufacturer has decided to take advantage of this button to transform it into a switch to modify the color of the RGB lighting without depending on the BIOS or other software.
Assembly of a PC in the argb endorfy ARX700
The assembly of the tower is really that he surprised us. It is a very amplo frame inside, thanks to which we can handle the components with total ease. The first thing we did, as usual, is to put up the rear power.
We present it, we place the screws and we have lent it. In our case, we used a modular source, so we only connected the cables we need. But, if we have a standard, we have a lot of space to hide all the cables we don't need.
After the fountain, we set up the motherboard. He has no mystery, we simply have to place it in his space and anchor it using the screws that come to us with the tower itself. The plate adapts perfectly and also has a lot
Finally, we will mount the cooling system. We have chosen endorfy liquid cooling, with a 360 mm radiator. We first install the radiator at the top, then the CPU block. All this very comfortably and without drawbacks.
We just have to climb the rest of the components, to finish with the wiring of the tower and voila. We already have our new endorfy arx 700 argb tower ready to give everything.
Conclusion, is it worth it?
The truth is that the tower has left us a very good taste of the mouth. The Polish manufacturer did an excellent job by designing and manufacturing his Sleaks 700 ArgB Sleevery 700. From the moment we withdraw the tower from his box, we only realize high quality materials have been used, and most of the details of this have been supported.
In this tower, we can climb practically any component: large air dissipators, liquid refrigerations up to 360 mm and even a range of beach beach. We have a lot of space to install the components, as well as large pipe options. The inclusive fans allow us, in addition to operating in silence, generating a large air flow to keep the whole PC as refrigerated as possible.
There are certain aspects to improve, it is clear. For example, there is the details of the rear cables, which should be much better ordered. Nothing that can not be corrected with a certain time and the bridles that come as standard. But, taking into account the fact that we are faced with a tower that has a PVP at around 120 dollars in Amazon, it's an excellent choice. A tower to launch years and years.
For all these reasons, we decided to put our Golden Award in this tower, highlighting, above all, its design and its quality / price ratio.
Table of Contents
