The hard drive or SSD is one of the most important components of all PCs, as it is used for turn on the computer And, above all, store all the information. If the hard disk or the SSD stops working, and we did not have the precaution of making a backup Periale or use a cloud storage platform as a backup, we have a serious problem very difficult to solve.
When we talk about a problem with the hard drive, we do not refer a problem with a partition or with the starting sectors which can be easily resolved without formatting. We refer to a Operating problemthat the unit is unable to read the data stored inside correctly because it has filled its useful life cycle.
All hard drives, such as SSD units, incorporate an inner counter responsible for recording the number of times it has been lit, readings and acts of number in addition to the number of hours that have been active. Based on this data, we may have an idea of the quantity of shelf life that can consult you.
How many hours have they used a hard drive?
If we have questions about the operation of our hard drive, from Windows, all we can know is if you are in good condition using CMD with the following command:
wmic diskdrive get status
This command will make an OK as many times as the units that we have installed and in the order following C: D:, F:…
Unfortunately, Windows does not show us what the number of hours That the storage unit of our PC has registered, therefore, once again, we are forced to use third part applications, the most recommended option being CrystalSiskinfo.
Crystalsiskinfo
CrystallSiskinfo is a free application that does not only show us the number of hours we used the hard drive or the SSD.
It also shows us the state in which it is through colorful codes:
- Azul – The state of the unit is good. In some models such as those that use the NVME interface, indicates the level of health with a percentage as possible in the upper image.
- YELLOW – There is less than 10% of life. The time has come to make a backup and look for a new one.
- Rojo – The unit has exceeded the maximum use limit and it is possible that the United States is not accessible to reproduce the data.
To calculate the health of the hard drive, use the number of hosts and acts of the host, the number of LMIT and hours of operation, among others, there is therefore no reference which indicates a specific number of hours during which a hard disk or SSD ceases to operate.
Downloading this application is completely free And the only way to do so to be sure that the application does not include any malicious software is via its website, which we can access from here.
Of Hardzone, we recommend that you download the Portable application Available in .zip format. Once we have downloaded it, we have decompressed the file and run the file corresponding to our Windows version: Dissinfo32.exe for 32 -bit windows (Windows 10 and previous versions) or Diskinfo64.exe for Windows 11 From now on (this version of Windows is only available for 64 -bit processors).
Once we have opened the application, the number of hours of use is indicated in the upper part, in the Artedo Hours later As you can see in the following image.
