As they say, "each teacher has his or her own booklet", which means that anyone who is committed to changing the PC has some tips and tricks for their harvest that help him or her paint and finish. In any case, we can tell you that if you follow these tips you will make the piece as beautifully painted as possible, and it will Performance story and experience is the owner of make it look better and better.
The first step is always to make more sand
Almost all components come with a factory paint layer, and we're already telling you that when you're ready to paint it in one color, you must first identify it. The reason is twofold: first because it is painting does not hold well in the other paint, and previous cuts will help us make the paint that will apply forever. The second reason is that in this way, we will not make the impression that the product is too large; In other words, if we put one layer over another it would have a thickness, even if it was a thin layer of paint.
To do this, use a sandpaper suitable depending on the material (As unlike the sand on the PC side, there is a plastic mouse) and a grain of grain, not to scratch the surface but simply remove the top layer of paint. It doesn't matter if you don't delete it at all, it doesn't make sense.
To clean, to clean
When painting a compound it is important to be as clean as possible, and as a result it is advisable to use it disposable gloves (which also serves to keep our hands off.) In any case, after the sanding process it is also we must clean the part to remove the dust and residues that remain in it.
As a general rule, you can use soap to wash dishes mixed with water and scarf without any problem, but it is best to use just water, soap and a sponge to avoid wrapping the clip. With access angles that are not easily accessible, you can use an old brush.
After cleaning with soap and water, it is recommended again (when everything is completely dry, because the paint does not stick to the water, so watch out for that) give the piece a new layer with cloth microphone and less of repairs with paint. It is a specific product that removes any grease or wax residue, specifically designed for use before painting. This step is optional.
Fix the painting again … to paint!
Drawing a piece of PC consists of 75% arrangement and 25% drawing. After preparing the piece, now is the time to prepare the paint. Of course you have already chosen the color, so all you have to do is create the mixture you need and adjust the paint beforehand, without compromising it because the one you don't use will ruin it.
The next step is to paint, and for this it is highly recommended to use a spray gun, spray spray, or air brush, as it will help to make the finish more comfortable. Do not use the brush in any way, which always leaves marks and the paint won't fit.
When you start painting, first give a soft layer, and don't worry if it's not as good or as good from this method, you should provide two layers of paint. Just make sure that in this first layer do not leave the material blank, because the second layer of paint will disappear and that everything is wrong, not "corrected" by the previous details. When drying the first layer, you can give a second (or a third if necessary) … paint until complete.
Now comes the trick, and once you've provided the necessary and dry paint layers, try mixing water with sandpaper as thin as possible. Finally, we'll give you a new layer of transparent varnish (it's up to you if you want it to be matt or glossy), and this is what will make the perfect piece in the piece.
And if you are not satisfied with the outcome, you know: make sand and start over again! It is a matter of doing the right thing.