The LAG problem is one of the most boring, which we play with a mouse, a keyboard or a command as if we use the computer mainly for us to work, because the time required for the computer to treat pulsations n 'is not immediate, but it can take, it can take, even a few seconds.
This problem should not always be linked to a dysfunction of the peripheralSo, in the first place, we must exclude that this is the problem by connecting it to any other PC.
What to do if the keyboard works badly
If the keyboard works without any problem in other equipment, it means that it is in our team, especially in the operating system.
Load it or change the batteries
Yes, it is a wireless keyboard, it is recommended Change the batteries Or charge it, because it is generally the usual solution to the keyboards' shift problems.
Approach the receiver
We continue to talk about wireless keyboards. Keyboards incorporating a Wireless receiverWe must be careful to place it at the front of the equipment to prevent the cables which leave the PC and the elements which surround it, can affect the quality of the signal sent to the keyboard.
Disable the filter keys function
Windows, unlike MacOS and Linux, makes it possible to modify the operation of the operating system in different ways, even through the keyboard shortcuts, so it should not surprise us for activating the occasional function which is not like anything similar , for example, the function Filter keys.
The function of the filter keys is in Windows accessibility options for people who are mobility problems and are responsible for ignorance of short or repeated clip pulsations and the modification of the speed of the repetition of the keyboard keyboard . To deactivate this function, we simply have to uncheck the switch available in the filter keys inside the Windows configuration options Accessibility> keyboard.
Background closing programs
Windows, unlike mobile phones, does not automatically close the applications that are in the background, therefore, over time, RAM memory Available is reduced by making the equipment slower and affecting performance.
If we have a large number of open applications that we do not use and the keyboard goes wrong, we must close them to check if here was the problem of the keyboard shift. We can carry out this application process by application or from the Responsible for tasks (ESC + Control + Capital). In the tab ProcessWe select the application that we want to close and click on the button Finishing task.
Check the keyboard properties
Windows allows you to modify the keyboard and mouse operation, which the manufacturer has a specific application. To modify its operation, we must access the properties of the keyboard, something we can do from the Windows search zone with the “keyboard” of the text (without quotes) and the selection of the keyboard option (panel configuration).
In the window indicated, we must modify the bar Repeat the delay Y Rehearsal speed To check if it is here where the problem of the keyboard was shown. From this same window, we can check the result of the modifications. Once the changes have been made, click on the application and finally accept.
Install the controller
If we continue without finding the origin of the problem, another method that we must also try to solve the keyboard problem is to eliminate the pilot and install it again. To do this, we must access the device administrator from the Windows search area and click on the section Keyboard.
Here we must select the keyboard and delete it. A few seconds later, the equipment will recognize that we have a keyboard installed and installs it again. If it is a keyboard that incorporates its own drivers, instead of erasing, we can access its properties and from the controller tab, select the location where it is on our PC.
Some other options must solve the problem, being the last format the equipment and the installation of windows from zero, as long as we are completely safe that the problem is not on the keyboard, but in the system of operating system .
Table of Contents
