The boxes have grown in size considerably, and you don’t have to go into a full tower to see it. The components are multiplying and that for the most part they meet the standards. But if it is not in thickness, it is in height and if not in width, so that means that if we look back a few years, the middle towers are the full tower of yesteryear. The new Nfortec Zetus arrives with a design that evokes this bygone era in terms of length, without losing the advantages that its youth and technology give it.
Nfortec Zetus, good ATX tower, nice and not very expensive, but compact
If there is something that characterizes Nfortec it is its quality / price ratio and this Zetus was no exception. We are talking (although it may not sound like it) of an ATX tower with unusual dimensions of 380 mm x 210 mm x 440 mm, which gives it a very light weight of only 5.1 Kg.
And don’t think that this weight is due to the use of plastics, not at all, on the contrary, since we have materials such as SPCC steel with an impressive 0.5mm and tempered glass for your window. . We are therefore talking about a well-built metal frame that will allow us to maintain the temperature of the components at a distance thanks to the possibility of including up to three 120 mm fans on the front, one on the front (included and with A-RGB) and two 120 or 140 mm on the ceiling.
As we have seen, its height is moderate, so it only allows a 360mm radiator in the front and a 120mm in the rear, leaving the roof free only with fans. As for the bays for the HDD / SSD, we have 2x 2.5 ″ + 2x 3.5 / 2.5 with, with a total of 7 expansion slots with two verticals for the GPUs.
Premium dust filters, heat sinks, power supplies and GPUs
What you might be wondering are the installation possibilities as such, as this is such a compact tower. And it is this Nfortec Zetus that surprises, as it allows ATX power supplies up to 180mm, GPUs up to 340mm and heat sinks up to 165mm in height.
As for its design itself, we are talking about a clean and elegant facade with A-RGB that has a series of openings that allow good air circulation. As we know, we have the option of installing GPUs vertically which is surprising by its measurements and it also has two dust filters, one on the ceiling and one on the bottom for the PSU.
What about its availability and price? It will be offered on Nfortec’s official website from 8/13/2021 (pre-purchase available) and will soon arrive on PcC and Amazon, yes, without a specific date. The price at which it is listed is 64.95 dollars and will come in two different colors: black and white, at the user’s choice.