For some time now, HyperX has been building great product recognition within the gaming ecosystem for its various brand products, such as keyboards, headphones, memory and storage solutions.
Their charger solutions may not have been widely seen, but you should know that they do charging stations of Smartphones, consoles and their controls, as well as dual solutions for mobile phones and watches or headphones, with Qi certification.
The case we are talking about here is that of the HyperX ChargePlay Clutch channel, a 6,000 mAh battery-powered system that will allow you to continue using Nintendo Switch on the go by being able to charge the Joy-Con console and controls while playing your game.
Design and attributes
Truth be told, the ChargePlay Clutch is well thought out by the HyperX engineers, as it is given to be a very large modem, with a large piece that serves as a fully integrated battery charging station, as well as two available joys for each Joy-Con.
The central station has a lever at the top that allows you to install the Nintendo switch console to install it and ensure it is properly configured on the USB C. charging connector. Even the smallest house will know how to operate.
At the base, the station has rubber pipes that prevent it from slipping on a table or flat surface. It is wide enough to stand upright, but it is natural to open the back foot to use the console in desktop mode.
The ChargePlay Clutch’s foot, much safer and more stable than what Nintendo offers with its switch, and resulting in so many users’ heads, only supports a position of about 45 degrees.
With sufficient angle, although given the choice, HyperX could use alternatives to better adapt to each situation, such as using equipment on a small plane table or train and setting the best screen viewing angle.
In any case, the console remains stable on a charging base. Both rear-switch grilles, as well as those placed on top, are removed to prevent air from entering their parts during use.
The headphone jack is also free, as well as the memory card space of the game so that it can change titles without removing the Nintendo switch from the charging station.
Already in the background, next to the USB-C charging connector, we find a visible button that when pressed allows us to determine the percentage of charging the channel battery using 4 LED indicators. This will allow us to wait for the end of the payment.
The other two additional pieces occupy Joy-Con, using strong magnets to attach to the charging station quickly, to ensure they are properly aligned.
In fact, this magnet is designed to take into account two different situations. Alternatively, you can set both available challenges to build a standard mount for a single controller Change (mimic that of Nintendo), and on the other hand, stick to the base station.
Also, the use of a paddle allows each Joy-Con to adhere strictly to the controls, provided that it is not likely to be removed in the middle of the game and not affected by vibration.
The grip has a certain grip on the back that will prevent them from slipping when the hands are a little sweaty, though it can always be improved by introducing something extra than the plastic they are made of.
In any case, HyperX effectively solves a wide range of possibilities and methods of thoughtful use of the switch, where the console content is, until your playback is unaffected when you attach this new accessory.
Once we have confirmed that the gaming experience is not affected by the use of the HyperX ChargePlay Clutch, we are focusing on another major goal, which is none other than ensuring long hours of play on the go or in areas without power outages.
From the beginning, the battery is integrated into the base. We assume that for security reasons, it cannot be removed from the channel. That doesn’t mean you can charge the battery at any time, even if you play with it.
We have assured you that the 6,000 mAh battery guarantees an additional 5 hours of use for your Nintendo switch, so that if the battery capacity of your console drops below 100 percent, the charging station will try to charge it to 100% of its capacity. capacity.
Obviously, for Joy-Con to get power, it must also be attached to the switch, because that’s the only way they have to get the power out. In other words, if Joy-Con stays attached to removable controls, it doesn’t act as a burden on them.
Price and where to buy
The HyperX ChargePlay Clutch charging station is for sale at a recommended price of $120. A 1.8 meter USB C cable is included for charging, but you will need an AC power adapter (not included).
Specifically, we found a HyperX channel for sale on Amazon, but it could be something specific that has happened in our time review. Check the final price where it is sold.
In a nutshell, HyperX offers Nintendo Switch Players an active accessory that can not only extend your battery life on the go, but also allows you to play comfortably with Joy-Con.
Extra weight of 400 grams can be a problem if you carry your console in the air for many hours without the help of the table-provided support, but as you already know, in return you get up to 5 hours of extra use and enjoy your energy.
Keep in mind that this app does not serve as a protective case or cover for your switch, at the same time that you cannot use another one while keeping the Switch attached to the ChargePlay Clutch. Otherwise, it meets the expectations of independence and governance.
- Nintendo Switch Channel
- 1.8 meter USB A to USB C charging cable
- 6,000 mAh battery
- Joy-Con Grip Discovery
- Dimensions 114.1 x 273.9 x 40.2 mm
- 400 grams weight