Digital adoption of the Xbox Series X specs has left many interesting details.
Most are related to power, Ray Tracing, storage or command. But in every operation, other aspects are equally important. Many have wondered why the Xbox Series X adopted a design that is so different from traditional consoles.
This is easy to explain when it comes to the freezer section, which Microsoft has launched again. This is an advanced cooling system for the Xbox Series X, using the Vapor Chamber system.
Something that can be interpreted as “Steam Rooms”, It is a really fresh air recycling program.
As shown in the picture we show below, we wanted the air ductwork to be adjusted in such a way that, by taking various directions, several channels were generated in which the air circulated. All of this ends up in the air, pushing all the air from each direction to the outside.
Far from building a single room where various heat pipes are connected, small stations are selected as well use of these Vapor rooms.
Xbox Game X’s first Ray Tracing gameplays show
When look ing at different refrigeration systems, the common thing is to transfer the air to its desired temperature. When we look at the liquid cooling, which is done to circulate the fluid at room temperature, then the radiator is exposed to the cooling air. In the case of Vapor Chamber,
Specifically, i The Vapor Room supported evaporation and immersion process through a series of small-size pipes, to a series of wings, thus extending the contact area through the external air. In this way, efficient thermal insulation is achieved, which can add features such as noise reduction, since large fan assembly is rarely required.
These are storage expansion cards in the Xbox Series X
The system itself contains liquids that evaporate into gas when exposed to heat. Electricity rises from the heat source. There, it apologizes and returns to the source. The whole process, both the heating of a liquid until it releases electricity, as well as the recycling when it comes in contact with the surrounding air, assumes an obvious energy transfer and allows the processor, or component, to be frozen, to be stored at the right temperature.
It’s a simple concept, but above all practical. So far, as in many other areas where it is necessary to cool a certain warm process through its operation, the cost of production can be problematic. This cost is mainly due to the fact that this technology it has certain limitations, as it is the maximum size allowed in those pipes or pipes, where liquids and smoke circulate.
Microsoft is sharing all the details about the new Xbox Series X controller
It has been seen that in many cases, having a solid metal radiator system can be sufficient for heat stroke and for a small amount of air that is usually resolved. But each of these requires an adequate ventilation system that raises the sound. In return for that radiator, even without a dense water cooling system, the Vapor Chamber system is a smart solution.
This program can remember, in part, to that used in the Xbox One X case. Only at this point, when one step has passed and it provides a comprehensive solution that will affect all aspects of Microsoft’s computer. This time around, it’s not used for the GPU only as a hybrid system. Microsoft has chosen install the Vapor Chamber system,
With Ray Tracing running the Xbox Series X processing capacity will reach 25TFLOPs
The same is true of scholars Xbox Series X cooling system, Vapor Chamber or a steam room, a cooling system that may seem expensive. But when we talk about how to maintain the entertainment levels that millions of users will enjoy, any effort is praised.
Microsoft also points out that it’s a job. He is not intimidated by designing at the Hardware level, and is constantly in touch with technical experts to find something to move forward. As well as its construction in use Direct X to GPU on Xbox One X, or in the case of Ray Following on the GPU as is Xbox Series X, the Xbox Series X cooling system is a new model for making user-friendly technology.
